Used Butech MS-625-78 Mechanical Power Squaring Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Butech MS-625-78 mechanical power squaring shear is available from Galaxie Corporation. It cuts strip and plate to length using a mechanical downcut single-rake blade.

It handles hot rolled, hot rolled pickled and oiled, and other steel up to 0.625 inches (5/8") thick and 76 inches wide, driven by a 100 horsepower AC motor. It runs at 100 strokes per minute, with auto gap control and driven entry kickout rolls.

Key Features

• Mechanical downcut shear with single rake
• Auto gap control
• Driven entry kickout rolls
• Flywheel and air clutch
• Tail pusher
• SOLA suppressor STV 25K series and SOLA power supply SDN 10-24-100

Technical Specifications

• Model: MS-625-78
• Year: 2000
• Shear style: Mechanical downcut (single rake)
• Material: HR, HRP&O, steel
• Thickness: 0.060–0.625 inches
• Strip width: 24–76 inches
• Shear strength: Up to 80,000 PSI to 0.500 inches; 50,000 PSI over 0.500 inches
• Line direction: Right to left
• Drive: 100 horsepower, AC
• Knife length: 86 inches
• Knife opening: 4.00 inches
• Knife rake angle: 0.500 inches per foot
• Stroke rate: 100 strokes/min
• Cut rate: 40 cuts/min minimum
• Scrap tail length: 24–30 inches minimum

Applications

• Cutting steel strip to length in coil processing lines
• Squaring and trimming steel plate and sheet
• Preparing blanks from hot rolled steel for further fabrication

Commercial Details

• Make: Butech
• Model: MS-625-78
• Year: 2000
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and width can it cut? It cuts steel from 0.060 to 0.625 inches thick in strip widths of 24–76 inches.
• How is it driven? It has a 100 horsepower AC drive with a flywheel and air clutch, running at 100 strokes per minute.
• Which year is it? It was built in 2000.
• What should I ask when enquiring? Ask for photos or video of it running, inspection arrangements, blade condition, whether the tail pusher, kickout rolls and SOLA electrics are included, control and electrical details, and loading and shipping options.