Used C and Z Purlin Continuous Vacuum Paint Line | Galaxie Corporation, Wayne, Michigan, USA

This used C and Z purlin continuous vacuum system paint line is available from Galaxie Corporation. It is a complete line that applies water-based primer to purlins and cures it in a gas-fired oven.

It handles purlins 75–350 mm wide and 37.5–87.5 mm high, in thicknesses of 1.5–3.5 mm and lengths up to 15 m. Painting speed is 70 m/min, and the curing oven takes batches 15 m long, 7 m wide and 2.15 m high.

Key Features

• Entry roller table with entry edge guides
• Closed vacuum painting system with stainless steel paint enclosure and multiple spray guns
• Paint tower with vacuum pump system and exit silencer, plus filtration
• Automatic paint refill with level control sensors
• Automatic directional change system with five modules and electronic sensor on a chain conveyor
• Curing oven with six synchronised chain transport conveyors moving the batch through the chamber
• Oven runs on natural gas or LP gas

Technical Specifications

• Product: C and Z purlins
• Purlin width range: 75–350 mm (2.9–13.7 in)
• Purlin height range: 37.5–87.5 mm
• Purlin thickness range: 1.5–3.5 mm (0.059–0.137 in)
• Maximum length: 15 m
• Entry roller table speed: Up to 200 fpm
• Painting speed: 70 m/min
• Paint: Water-based quick-dry primer
• Vacuum pump power: 11.25 kW
• Direction change modules: 5
• Oven burners: 3 x 110 Mcal (486,807.4 BTU each)
• Total oven capacity: 1,350,000 BTU
• Oven fuel: Natural gas or LP gas
• Oven batch size: 15 m long x 7 m wide x 2.15 m high
• Oven transport conveyors: 6 chain conveyors
• Electrical supply: 460 V, 60 Hz, 3 phase
• Year: 2023

Applications

• Priming steel C and Z purlins for building roofs and walls
• Coating structural framing sections for steel buildings
• Finishing purlin batches before dispatch or installation

Commercial Details

• Year: 2023
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What sizes of purlin can the line paint? It handles purlins 75–350 mm wide, 37.5–87.5 mm high and 1.5–3.5 mm thick, up to 15 m long.
• How fast does it paint? Painting speed is 70 m/min.
• What power supply does it need? The electrical requirement is 460 V, 60 Hz, 3 phase.
• What should I ask when enquiring? Ask for photos or video of the line running, whether an inspection is possible, which components and spare parts are included, the condition of the control and electrics, and the loading and shipping arrangements for a line of this size.