Used Canton 11A Alligator Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Canton 11A alligator shear is available from Galaxie Corporation. It is rated for 2 in square bar or 3/8 in x 24 in mild steel, with a 24 in capacity.

It makes 456 cuts per minute and is driven by a 5 HP motor through V-flat belts to a flat-face flywheel. The knives are 24 in long, 5 in deep and 1 1/4 in thick, with an 8 in jaw opening.

Key Features

• Low knife style, right or left hand
• Rebuilt air clutch
• Bronze bushings throughout on the kingpin, crankshaft, counter shaft and pitman arm
• V-flat belt drive from grooved motor sheave to flat-face flywheel

Technical Specifications

• Model: Canton 11A
• Capacity: 24 in
• Mild steel capacity: 2 in square or 3/8 in x 24 in
• Cuts per minute: 456
• Knife size: 24 in long, 5 in deep, 1 1/4 in thick
• Jaw opening: 8 in
• Motor: 5 HP, 220/440 V, 60 Hz, 3 phase
• Floor space: Approx. 2 ft 10 in x 8 ft 8 in
• Weight: Approx. 7,000 lb

Applications

• Cutting mild steel bar and flat stock to length
• Cutting square bar up to 2 in
• Scrap processing and metal recycling
• General metal fabrication shops

Commercial Details

• Make: Canton
• Model: 11A
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What can the Canton 11A cut? It is rated for 2 in square bar or 3/8 in x 24 in mild steel.
• How fast does it cut? It runs at 456 cuts per minute.
• What power does it need? It has a 5 HP motor for 220/440 V, 60 Hz, 3 phase supply.
• What should I ask when enquiring? Ask for photos or video under power, inspection options, the condition of the knives and clutch, electrical details, and loading and shipping arrangements.