Used CEC Annealing Furnace for Sheets and Parts | Galaxie Corporation, Wayne, Michigan, USA

This used CEC annealing furnace for sheets and parts is available from Galaxie Corporation. It is a gas-fired continuous furnace with a heating zone and a cooling zone, fed by a single conveyor built for aluminium.

Total burner input is up to 3,000,000 BTU/hour from two built-in gas burners. The heating chamber runs at up to 850°F air temperature and the cooling chamber at 90°F, with the conveyor running continuously through the full 102 ft length.

Key Features

• Two built-in gas burners
• Conveyor made specifically for aluminium, continuous through the whole oven
• 25 HP blower fans manage the heating and cooling curves
• Heating and cooling temperature control suited to varied curve requirements
• Additional operational, control and safety specifications are available

Technical Specifications

• Make: CEC
• Machine type: Annealing furnace
• Burner input: Up to 3,000,000 BTU/hour (two burners)
• Gas supply: Natural gas at 5 PSI
• Electrical supply: 480 V, 3-phase
• Heating zones: 2 zones, each 22 ft 6 in long
• Heated length: 45 ft
• Gap between heating and cooling: 2 ft
• Cooling zone length: 45 ft
• Conveyor extension: 5 ft on each end
• Overall length: 102 ft
• Conveyor width: 88 in
• Oven opening: 5.25 in high by 96 in wide
• Maximum heating chamber air temperature: 850°F
• Cooling chamber temperature: 90°F
• Blower fans: 25 HP
• Operating time: 40 hours

Applications

• Annealing aluminium sheet
• Annealing aluminium parts
• Softening formed or stamped aluminium components before further processing

Commercial Details

• Make: CEC
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What fuel and power does it need? It runs on natural gas at 5 PSI and 480 V, 3-phase electricity.
• How long is the furnace? Overall length is 102 ft, including a 45 ft heated length, a 2 ft gap, a 45 ft cooling zone and 5 ft conveyor extensions at each end.
• What temperatures does it reach? The heating chamber runs up to 850°F air temperature and the cooling chamber at 90°F.
• What should I ask when enquiring? Ask for photos or video of the furnace, whether it can be inspected, the burner and control system details, the electrical and gas requirements, and arrangements for dismantling, loading and shipping a line of this length.