Used Complete Coil to Coil Colour Coating Paint Line | Galaxie Corporation, Wayne, Michigan, USA

This used complete coil-to-coil colour coating paint line is available from Galaxie Corporation. It takes coil from an entry coil car through cleaning, painting and curing to a recoiler.

The line handles coil 200–750 mm wide, with a maximum coil weight of 8,000 kg and a maximum coil outside diameter of 1,250 mm. The page lists a strip thickness of 0.028 inches (0.70 mm in the title) and a width of 30 inches.

Key Features

• Floor-type entry coil car for coils up to 8 tonnes
• Hydraulically expanding mandrel uncoiler with powered hold-down roll
• Shear and end welder with stitcher for joining coils
• Entry accumulator, 12 rolls, 6 m height, with polyurethane entry rolls
• Washing, rinsing and drying section
• Painting head with primer rolls, top-coat paint/varnish rolls and positive pressure rolls
• Two flights of curing ovens followed by a forced-air cooling section
• Exit accumulator (9 rolls, 6 m height), film applicator area and recoiler; hydraulics, electrics and controls included

Technical Specifications

• Coil width range: 200–750 mm
• Line width: 30 inches
• Strip thickness: 0.028 inches (0.70 mm)
• Maximum coil weight: 8,000 kg
• Maximum coil OD: 1,250 mm
• Uncoiler mandrel face: 1,300 mm
• Entry coil car capacity: 8 t maximum
• Entry accumulator: 12 rolls, 6 m height
• Exit accumulator: 9 rolls, 6 m height
• Curing ovens: 2 flights
• Recoiler capacity: 3.5 t

Applications

• Pre-painted metal coil for roofing and wall cladding
• Coloured coil for roll forming into building profiles
• Coated strip for appliance and panel manufacturing
• Coil-fed painting of metal strip in a continuous process

Commercial Details

• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes does the line take? It takes coil 200–750 mm wide, up to 8,000 kg and up to 1,250 mm outside diameter.
• What stages does the line include? It includes uncoiling, shear and end welding, entry accumulator, washing, rinsing and drying, painting head, two curing oven flights, cooling, exit accumulator and recoiler.
• Does it include controls? Yes, the line is listed complete with hydraulics, electrics and controls.
• What should I ask when enquiring? Ask about photos or video of the line, inspection options, which components and spare rolls are included, the electrics and control condition, the oven heating type, and dismantling, loading and shipping arrangements.