Used Complete Profile and Sheet Powder Coating Line | Galaxie Corporation, Wayne, Michigan, USA

This used complete powder coating paint line for profiles and sheets is available from Galaxie Corporation. It is set up to paint aluminium or steel profiles and sheets, hung on bars and passed through application and curing.

Medium loads are 6,500 x 300 x 1,500 mm (H), rising to 8,000 x 500 x 1,500 mm at a double bar step. Sheets up to 5,000 x 1,500 x 3 mm can be run, with a maximum charge weight of 120 kg. Output is more than 18 bars/hour with one application unit and more than 30 bars/hour with two.

Key Features

• Can be equipped with one or two application units
• CNC control
• Larger charges up to 8,000 mm are loaded with the holding bars at a double step

Technical Specifications

• Material to be painted: Aluminium or steel profiles and sheets
• Medium charge dimensions: 6,500 x 300 x 1,500 mm (H)
• Maximum charge dimensions: 8,000 x 500 x 1,500 mm
• Maximum sheet dimensions: 5,000 x 1,500 x 3 mm
• Maximum charge weight: 120 kg
• Capacity, 1 application unit: More than 18 bars/hour, equal to 864 aluminium profiles at 4 kg average
• Capacity, 2 application units: More than 30 bars/hour, equal to 1,440 aluminium profiles at 4 kg average
• Curing temperature: 180–210°C
• Curing time: About 25 minutes
• Maximum oven air temperature: 230°C
• Installed electric power: Approx. 350 kW
• Supply: 400 Vac, 50 Hz, 3 phase + earth
• Installed thermal capacity: 500,000 + 160,000 kcal/h
• CNC control: Yes

Applications

• Powder coating aluminium profiles for architectural and industrial use
• Painting steel profiles
• Coating flat aluminium or steel sheets
• Finishing batches of long bar-hung parts

Commercial Details

• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What sizes can the line coat? Medium loads are 6,500 x 300 x 1,500 mm (H), up to 8,000 x 500 x 1,500 mm at a double bar step, and sheets up to 5,000 x 1,500 x 3 mm.
• What is the production capacity? More than 18 bars/hour with one application unit and more than 30 bars/hour with two, based on aluminium profiles averaging 4 kg.
• What are the curing conditions? Curing is at 180–210°C for about 25 minutes, with a maximum oven air temperature of 230°C.
• What should I ask when enquiring? Ask for photos or video of the line, whether it is still installed, how many application units are fitted, what conveyors, ovens and pretreatment are included, the control and electrics, and loading and shipping arrangements.