Used Delta Brands Equalizer Tension Level Line | Galaxie Corporation, Wayne, Michigan, USA

This used Delta Brands Equalizer tension level line is available from Galaxie Corporation. It is built to remove flatness defects from flat-rolled steel, including edge wave, centre buckle, cross bow and camber.

It handles material from .024" to .135" thick and coils up to 40,000# with a 72" outside diameter. It is a complete line, with coil car, uncoiler, tension leveling unit, exit crop shear and recoiler, supplied with hydraulics, electrics and controls.

Key Features

• Mechanical and electrical tension control
• Programmable speed, elongation and tension
• Shape correction, elongation and reverse bending
• Allen Bradley digital controls, Model 1395 digital drives and Model 5/30 PLC
• Three-roll backed-up tension leveler cluster with 2" diameter rolls
• Adjustable tension rolls with dual water-cooled brakes
• Equalizer unit can also be installed at the exit end of a slitting line before recoiling to tension level strips

Technical Specifications

• Line size: 60" x .135"
• Thickness range: .024–.135"
• Coil capacity: 40,000#
• Coil OD: 72"
• Coil ID at entry: 16"–24"
• Coil ID at exit: 20" and 24"
• Year: 1987
• Leveler rolls: 3-roll backed-up cluster, 2" diameter rolls
• Entry bridle roll: 23.375" diameter, driven
• Tension roll: 23.375" diameter, driven, downward pressure
• Exit bridle roll: 23.375" diameter, driven
• Adjustable tension rolls: 2 x 20" diameter with dual water-cooled brakes
• Pressure roll: 12" diameter, bottom pivoting
• Drive: 250 HP DC drive with 2-speed gearbox
• Recoiler drive: 250 HP DC with 2-speed gearbox
• Controls: Allen Bradley digital controls, 1395 drives, PLC 5/30
• Uncoiler: Cincinnati mandrel, hydraulic expansion, air clutch and brake

Applications

• Flattening flat-rolled steel coil before further processing
• Correcting edge wave, centre buckle, cross bow and camber
• Tension levelling strip at the exit of a slitting line

Commercial Details

• Make: Delta Brands
• Model: Equalizer
• Year: 1987
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and coil size can it process? It levels material .024–.135" thick from coils up to 40,000# and 72" outside diameter.
• What equipment is included in the line? It includes an L-type coil car, Cincinnati mandrel uncoiler, peeler table, Equalizer leveling unit, exit crop shear, exit feed-up table and recoiler with hydraulics, electrics and controls.
• What controls does it use? It has Allen Bradley digital controls, Model 1395 digital drives and a Model 5/30 PLC, with programmable speed, elongation and tension.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, confirmation of all listed components and tooling, the condition of the controls and electrics, and loading and shipping details.