Used Eurosider 3-High Roughing Bar Mill | Galaxie Corporation, Wayne, Michigan, USA

This used Eurosider 3-high roughing bar mill, built in 2014 in Spain, is available from Galaxie Corporation. It was used for roughing 140 × 140 mm billets and can handle larger reductions.

It has three shafts with 480 mm diameter, 1,200 mm long rolls at a 500 mm shaft centre distance, driven by a 750 kW AC slip-ring motor. Two driven roller tables with hydraulic lifting and a Siemens Simatic PLC are included, along with spare parts.

Key Features

• Hydraulic lifting tables
• Two driven roller tables, with 13 and 16 rolls
• Siemens Simatic HM1 PLC with Telemecanique and Schneider Electric components
• Spare 750 kW motor included
• Spare set of gearboxes for the three shafts included, plus various bearings

Technical Specifications

• Manufacturer: Eurosider, Spain
• Year of manufacture: 2014
• Type: 3-high roughing mill
• Application: Roughing of 140 × 140 mm billets, with capacity for larger reductions
• Roll diameter: 480 mm
• Roll length: 1,200 mm
• Shafts: 3
• Shaft centre distance: 500 mm
• Main drive: 750 kW AC slip-ring motor
• Gearbox: 1,000 HP; input 950 RPM, output 130 RPM
• Pinion stand: 1,500 HP; output 130 RPM
• Table No. 1: 13 driven rolls, Ø215 mm × 5,900 mm long × 1,700 mm wide
• Table No. 2: 16 driven rolls, Ø215 mm × 6,300 mm long × 1,700 mm wide
• Control: Siemens Simatic HM1 PLC
• Spare parts included: 1 × 750 kW motor, 1 × set of gearboxes for the three shafts, various bearings

Applications

• Roughing steel billets in bar rolling lines
• Reducing 140 × 140 mm billets to intermediate sections
• First-stage reduction ahead of finishing mills

Commercial Details

• Make: Eurosider
• Year: 2014
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What size billet does this mill rough? It was used for roughing 140 × 140 mm billets and has capacity for larger reductions.
• What drive does it have? A 750 kW AC slip-ring motor drives it through a 1,000 HP gearbox and a 1,500 HP pinion stand, with 130 RPM output.
• Are spare parts included? Yes: a 750 kW motor, a set of gearboxes for the three shafts and various bearings.
• What should I ask when enquiring? Ask about photos or video of the mill under power, inspection options, whether the tables and spares are included, the condition of the electrics and PLC, and loading and shipping arrangements.