Used Fagor Arrasate 1525 mm x 6 mm Cut To Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Fagor Arrasate cut-to-length line is available from Galaxie Corporation. It uncoils, flattens and shears steel coil into flat sheets, handling strip 1.5–6 mm thick and 500–1,525 mm wide.

The line takes coils up to 20 t and runs at 20 m/min, cutting formats from 1,000 mm to 6,000 mm long. It processes cold-rolled, galvanised and hot-dip galvanised steel.

Key Features

• Hydraulic loading carriage that moves coils from the crane position onto the mandrel
• Hydraulically expandable, motorised mandrel with web pressing arm and pneumatic disc brake
• Sliding base for centring the coil to the strip width
• 15-roller flattening machine with 109 counter rollers
• Oscillating blade shear with clutch-controlled cut
• Measuring and evacuation table with motorised rollers and a piece-ejecting roller
• Two control desks; technical documentation, electrical, hydraulic and pneumatic drawings and foundation plans included

Technical Specifications

• Make: Fagor Arrasate
• Materials: Cold-rolled, galvanised and hot-dip galvanised steel coil
• Thickness: 1.5–6 mm
• Strip width: 500–1,525 mm
• Working speed: 20 m/min
• Cut length: 1,000–6,000 mm
• Cutting tolerance: ±1
• Maximum coil weight: 20 t
• Coil inner diameter: 508 mm
• Maximum coil outer diameter: 1,800 mm
• Working direction: Left/right
• Loading carriage capacity: 20 t
• Loading carriage travel: 500 mm vertical, 2,250 mm transverse
• Mandrel diameter: 475–525 mm
• Mandrel gearmotor: 2.2 hp
• Flattening rollers: 15 x Ø65 mm
• Counter rollers: 109 x Ø110 mm
• Flattener speed: 10–20 m/min
• Flattener main motor: 56 kW AC
• Flattener weight: 19 t
• Shear strokes: 120/min continuous cycle
• Shear maximum thickness: 6 mm
• Shear motor: 15 hp
• Measuring table travel speed: 25 m/min
• Measuring table installed power: 6 hp

Applications

• Producing flat steel sheets and blanks from coil
• Supplying sheet for pressing, fabrication and further processing
• Processing galvanised and cold-rolled steel sheet
• Cutting thicker plate-gauge sheet up to 6 mm

Commercial Details

• Make: Fagor Arrasate
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and width can it process? It handles strip 1.5–6 mm thick and 500–1,525 mm wide.
• What sheet lengths can it cut? It cuts formats from 1,000 mm to 6,000 mm long.
• What coil size can it take? Coils up to 20 t, with a 508 mm inner diameter and up to 1,800 mm outer diameter.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection, the documentation and drawings included, the electrical and control condition, and loading and shipping arrangements.