Used Fagor Arrasate Cut To Length Line, 1500 mm x 10 mm | Galaxie Corporation, Wayne, Michigan, USA

This used Fagor Arrasate cut-to-length line is available from Galaxie Corporation. It uncoils, levels and shears steel coil into flat sheets, and is rated for coil up to 1,500 mm wide and 1.5–10.0 mm thick.

The line takes coils up to 25 t and cuts sheets from 500 mm to 12,000 mm long at up to 25 m/min. It is supplied as a complete line with a 4-high leveler, mechanical shear and drop-type stacker.

Key Features

• Pit-type coil car and double expandable mandrel
• Powered hold-down roll and entry guide rolls
• TACI Arrasate 4-high leveler with hydraulic actuation
• Five flights of top and bottom motorised back-ups
• Pit cross-over table, conveyor table and feeder roll
• TACI mechanical shear
• Drop-type stacker and motorised run-out table
• Supplied with electrics, hydraulics, controls and drawings

Technical Specifications

• Manufacturer: Fagor Arrasate
• Max coil width: 1,500 mm
• Min coil width: 300 mm
• Thickness range: 1.5–10.0 mm
• Max coil weight: 25 t
• Coil outside diameter: 600–2,000 mm
• Coil inside diameter: 508–760 mm
• Sheet length: 500–12,000 mm
• Max line speed: 25 m/min
• Line direction: Left to right
• Leveler: TACI Arrasate 4-high, hydraulic actuation
• Shear: TACI mechanical shear
• Stacker: Drop type

Applications

• Producing flat steel sheets from heavy-gauge coil
• Blanks for fabrication and press shops
• Plate-thickness sheet for structural and machinery parts
• Preparing levelled sheet for further cutting or forming

Commercial Details

• Make: Fagor Arrasate
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can the line handle? Coil width is 300–1,500 mm, thickness 1.5–10.0 mm and weight up to 25 t.
• What sheet lengths can it cut? Sheets are cut from 500 mm to 12,000 mm long at up to 25 m/min.
• What equipment is included? It includes a coil car, double mandrel, 4-high leveler, feeder, mechanical shear, drop-type stacker and run-out table, with electrics, hydraulics, controls and drawings.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, confirmation of the included equipment and drawings, control and electrical details, and loading and shipping arrangements.