Used Fagor Arrasate Cut To Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Fagor Arrasate cut-to-length line is available from Galaxie Corporation. It uncoils, flattens and cuts cold-rolled galvanised steel coil into flat sheets between 600 and 4,000 mm long.

The line takes strip 500–1,525 mm wide and 0.50–2.5 mm thick from coils up to 20 t, and runs at 20 m/min. It is built around a 19-roller flattening machine, a loop-forming pit and an oscillating blade shear.

Key Features

• Hydraulic loading carriage moves coils from the crane position onto the mandrel
• Hydraulically expandable mandrel with four expanding sectors that lock the coil in place
• Motorised mandrel for feeding and collecting excess material, with pneumatic disc brake to hold strip tension
• Sliding base centres the coil to the strip width by hydraulic cylinder
• Web pressing arm keeps the strip tight when the coil seal is removed
• Hydraulic loop-forming pit tables store the strip during cutting
• Measuring and evacuation table with motorised-roller conveyor belt
• Two control desks; technical, electrical, hydraulic, pneumatic and foundation drawings included

Technical Specifications

• Material: Cold-rolled galvanised steel coil
• Strip thickness: 0.50–2.5 mm
• Strip width: 500–1,525 mm
• Working speed: 20 m/min
• Cut length: 600–4,000 mm
• Cutting tolerance: ±1
• Maximum coil weight: 20 t
• Coil inner diameter: 508 mm
• Maximum coil outer diameter: 1,800 mm
• Loading carriage capacity: 20 t
• Loading carriage vertical travel: 600 mm
• Loading carriage transverse travel: 2,250 mm
• Mandrel diameter: 475–525 mm
• Axial centring stroke: 300 mm
• Mandrel gearmotor: 3 kW
• Flattener useful width: 1,500 mm
• Flattener speed: 10–20 m/min
• Flattening rollers: 19 × Ø45 mm
• Counter rollers: 19 × Ø40 mm
• Support rows: 7+7
• Counter roller supports: 175
• Flattener main motor: 30 hp AC
• Flattener adjustment motors: Two 3 hp, 1,500 rpm
• Flattener lubrication motor: 0.35 kW
• Flattener weight: 11 t
• Shear strokes, continuous cycle: 140/min
• Shear clutch cycles: 30/min
• Shear maximum thickness: 3 mm
• Shear motor: 7.5 hp
• Measuring table useful width: 1,500 mm
• Measuring table maximum cut length: 4,000 mm
• Measuring table travel speed: 25 m/min
• Measuring table installed power: 4 hp
• Working direction: Left/right

Applications

• Producing flat galvanised steel sheets for roll forming and press work
• Blanks for sheet metal fabrication
• Sheet supply for panel and cladding manufacture
• Coil processing for steel service centres

Commercial Details

• Make: Fagor Arrasate
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material and sizes can the line process? It processes cold-rolled galvanised steel coil 0.50–2.5 mm thick and 500–1,525 mm wide, cutting sheets 600–4,000 mm long.
• What is the maximum coil weight? The line takes coils up to 20 t, with a 508 mm inner diameter and up to 1,800 mm outer diameter.
• What documentation is included? Technical documentation, electrical, hydraulic and pneumatic drawings, foundation plans and civil engineering details are included.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection, the exact equipment and spares included, electrical supply and control details, and loading and shipping arrangements.