Used Fagor Arrasate Slitting Line, 1520 mm x 6 mm | Galaxie Corporation, Wayne, Michigan, USA

This used Fagor Arrasate slitting line is available from Galaxie Corporation. It cuts steel coil into narrower strips and rewinds them, and takes cold-rolled, galvanised and hot-dip galvanised coils.

It handles coils up to 20 t and strip 0.4–6 mm thick, with widths from 200 mm to 1,500 mm. The line can make up to 20 slits at a working speed of 130 m/min.

Key Features

• Hydraulic loading carriage with 750 mm vertical and 4,000 mm transverse travel
• Hydraulically expanding uncoiler mandrel with web press arm, water-cooled inflatable chamber brake and automatic web centring
• Wedge guide and 3-roller straightener at the infeed
• Circular shear with two gear-motor-driven shafts
• Measuring table and two loop pit tables
• Edge coiler with hydraulic scrap ejector for the trimmed edges
• Strip tensioner using pneumatic pressure and felts, plus a hydraulic expulsion plate and motorised unloading arm
• Includes technical documentation, electrical, hydraulic and pneumatic drawings, and foundation plans

Technical Specifications

• Material: Cold-rolled, galvanised and hot-dip galvanised steel coil
• Thickness: 0.4–6 mm
• Strip width: 200–1,500 mm
• Working speed: 130 m/min
• Production speed (short/long): 70–130 m/min
• Maximum number of slits: 20
• Slitting tolerance: ±0.01
• Maximum coil weight: 20 t
• Coil inner diameter: 508 mm
• Maximum coil outer diameter: 1,500 mm
• Uncoiler mandrel diameter: 475–525 mm
• Axial centring stroke: 300 mm
• Loading carriage capacity: 20 t
• Circular shear shafts: 2
• Circular shear length x diameter: 1,600 mm x 190 mm
• Edge coiler maximum diameter: 600 mm
• Edge coiler motor: 15 hp
• Output mandrel capacity: 20 t
• Line direction: Left/right

Applications

• Steel service centres cutting master coils into narrower strip
• Preparing coil for roll forming and stamping
• Slitting cold-rolled and galvanised steel for manufacturing

Commercial Details

• Make: Fagor Arrasate
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can it run? Coils up to 20 t, up to 1,500 mm wide and 1,500 mm outside diameter, on a 508 mm inner diameter.
• How many strips can it cut at once? Up to 20 slits, with strip widths from 200 mm to 1,500 mm.
• What thickness range does it handle? 0.4–6 mm in cold-rolled, galvanised and hot-dip galvanised steel.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, which slitting knives, spacers and spare parts are included, the condition of the hydraulics and electrics, and loading and shipping details.