Used Fagor Flying Shear 2150mm x 21mm | Galaxie Corporation, Wayne, Michigan, USA

This used Fagor flying shear is available from Galaxie Corporation. It cuts moving strip to length without stopping the line, and is rated for coil 650–2,150 mm wide and 1.4–21 mm thick.

It runs at up to 50 m/min and makes up to 25 cuts per minute. The shear is hydraulic, and the traversing drive is an 80 kW AC motor. Year of manufacture is 2007, and the listing states it was mechanically overhauled in 2024.

Key Features

• Hydraulic shear cut
• Cassette injector blade change system with 2 cassettes
• Double rack and pinion traverse
• Strip holder
• Motorised gap adjustment
• Exit belt conveyor

Technical Specifications

• Make: Fagor
• Year: 2007
• Thickness range: 1.4–21 mm
• Coil width: 650–2,150 mm
• Maximum speed: 50 m/min
• Cuts per minute: 25
• Yield strength: 170–750 N/mm²
• Tensile strength: 170–900 N/mm²
• Traversing drive: 80 kW AC motor
• Shear cut: Hydraulic
• Blade change: Cassette injector system, 2 cassettes
• Traverse: Double rack and pinion

Applications

• Cut-to-length of steel coil on processing lines
• Blanking of heavy-gauge strip up to 21 mm
• Sheet and plate production from coil
• Continuous lines where the strip cannot be stopped for cutting

Commercial Details

• Make: Fagor
• Year: 2007
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can it cut? It handles coil 650–2,150 mm wide and 1.4–21 mm thick.
• How fast does it run? The maximum line speed is 50 m/min, with up to 25 cuts per minute.
• How are the blades changed? It uses a cassette injector blade change system with 2 cassettes.
• What should I ask when enquiring? Ask for photos or video of the shear under power, details of the 2024 mechanical overhaul, the condition of the blades and cassettes, control and electrical details, and loading and shipping arrangements.