Used Fenn 2-HI Rolling Mill, 10" x 5" | Galaxie Corporation, Wayne, Michigan, USA

This used Fenn 2-HI rolling mill, with 10" (254 mm) work rolls and a 5" (127 mm) roll width, is available from Galaxie Corporation. A two-high mill reduces or flattens metal by passing it between two rolls.

The rolls are 2-1/2" (63.5 mm) wide carbide shell inserts mounted on 5" (127 mm) wide steel rolls, and they are water-cooled. A 75 HP DC General Electric motor drives the mill through a pinion stand and reducer, and a spare set of carbide shell rolls is included. The buyer needs to supply new electric controls.

Key Features

• Water-cooled rolls
• Carbide shell inserts on steel rolls
• Fenn-type roller bearings with forced oil lubrication
• Dual handwheel screwdowns
• Square-type universal drive joints
• One spare set of carbide shell rolls included

Technical Specifications

• Manufacturer: Fenn Manufacturing Company (USA)
• Type: 2-HI rolling mill
• Roll diameter: 10" (254 mm)
• Roll face: 2-1/2" (63.5 mm) wide carbide shell inserts
• Steel roll width: 5" (127 mm)
• Roll cooling: Water-cooled
• Housing column size: 6" x 6" (152 mm x 152 mm)
• Window width: 10-5/8" (270 mm)
• Bearings: Fenn-type roller bearings
• Bearing lubrication: Forced oil
• Drive motor: 75 HP General Electric Kinamatic DC motor, 850/1700 RPM, 500 V
• Reducer: Horsburgh & Scott pinion stand/reducer, size 10 W-27-SPL, ratio 11.56, 75 HP rating, service factor 1.0, input 800/1700 RPM
• Screwdowns: Dual handwheel
• Drive joints: Square-type universal joints
• Width: 90" (2,286 mm)
• Depth: 102" (2,590 mm)
• Height: 90" (2,286 mm)

Applications

• Flattening wire and narrow strip
• Cold rolling narrow metal strip
• Reducing thickness of small-section metal stock

Commercial Details

• Make: Fenn
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What size are the rolls? The rolls are 10" (254 mm) in diameter, with 2-1/2" (63.5 mm) wide carbide shell inserts on 5" (127 mm) wide steel rolls.
• What drives the mill? A 75 HP General Electric Kinamatic DC motor drives it through a Horsburgh & Scott pinion stand and reducer.
• Does it come with controls? No, the buyer must supply new electric controls. A spare set of carbide shell rolls is included.
• What should I ask when enquiring? Ask for photos or video of the mill, the condition of the rolls and bearings, inspection arrangements, what is included with the spare rolls and drive, requirements for the new electric controls, and loading and shipping.