Used FIMI Cut To Length Line With Flying Shear | Galaxie Corporation, Wayne, Michigan, USA

This used FIMI cut-to-length line with flying shear is available from Galaxie Corporation. It is an Italian-built line that uncoils, flattens and cuts coil into flat sheets, and it was manufactured in 1997.

It takes coils up to 2,520 mm wide and 80,000 pounds, and cuts sheets from 500 mm to 16,000 mm long to a length tolerance of ±1 mm at up to 40 m/min. The line runs right to left and is complete with electrics, controls and hydraulics.

Key Features

• Floor-type coil car and double expandable mandrel uncoiler
• Peeler hold-down roll unit, entry pinch roll with edge guides and entry crop shear
• Three-stage flattening: 3-roll coil breaker, 5-roll pre-straightener, 9-roll straightener and 11-roll leveler
• Brushing system with fumes extraction vacuum
• Flying shear, run-out conveyor and drop-type stacker

Technical Specifications

• Manufacturer: FIMI (Italy)
• Year: 1997
• Line direction: Right to left
• Maximum coil weight: 80,000 pounds
• Maximum material thickness: 0.59 inches
• Maximum entry coil width: 2,520 mm
• Minimum coil width: 400 mm
• Coil inner diameter: 508–762 mm
• Coil outer diameter: 900–2,400 mm
• Sheet length: 500–16,000 mm
• Length tolerance: ±1 mm
• Maximum working speed: 40 m/min
• Pre-straightener: 5 rolls, 200 mm work roll diameter
• Straightener: 9 rolls, 160 mm work roll diameter
• Leveler: 11 work rolls, 112 mm work roll diameter
• Shear: Flying shear
• Stacker: Drop type

Applications

• Producing flat steel sheets from coil
• Preparing blanks for fabrication and press shops
• Supplying plate and sheet to service centres
• Cutting long sheets up to 16,000 mm for structural and general fabrication

Commercial Details

• Make: FIMI
• Year: 1997
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What sheet lengths can the line cut? It cuts sheets from 500 mm to 16,000 mm long with a length tolerance of ±1 mm.
• What coil sizes can it handle? It takes coils up to 2,520 mm wide and 80,000 pounds, with an inner diameter of 508–762 mm and an outer diameter of 900–2,400 mm.
• How fast does it run? The maximum working speed is 40 m/min.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection arrangement, confirmation of the included components, the condition of the control system and electrics, and loading and shipping details for a line of this size.