Used FIMI Flying Shear, 60" x .315" | Galaxie Corporation, Wayne, Michigan, USA

This used FIMI flying shear is available from Galaxie Corporation. It cuts moving strip to length without stopping the line, and it was built by FIMI in Italy in 1999.

It handles strip from 15" to 60" wide and .118" to .315" thick, with a pass line of 39". Line speed reaches 30 m/min on cut lengths from 3000 mm upward.

Technical Specifications

• Manufacturer: FIMI, Italy
• Year: 1999
• Type: Flying shear
• Width range: 15" to 60"
• Thickness range: .118" to .315"
• ST37 thickness: .118" to .315"
• ST52 thickness: .118" to .250"
• Max yield strength: 500 N/mm²
• Max stretching: 20%
• Pass line: 39"
• Cut length 750 mm: 12 cuts, 9 m/min
• Cut length 1000 mm: 12 cuts, 12 m/min
• Cut length 1500 mm: 12 cuts, 18 m/min
• Cut length 2000 mm: 12 cuts, 24 m/min
• Cut length 3000 mm: 10 cuts, 30 m/min
• Cut length 4000 mm: 7 cuts, 30 m/min
• Cut length 5000 mm: 6 cuts, 30 m/min
• Cut length 6000 mm: 5 cuts, 30 m/min
• Cut length 7000 mm: 4 cuts, 30 m/min
• Cut length 8000 mm: 3 cuts, 30 m/min
• Cut length 10000 mm: 3 cuts, 30 m/min
• Cut count tolerance: +/- 5%

Applications

• Cutting coil to length in cut-to-length lines
• Producing flat sheet and plate blanks from steel strip
• Supplying blanks for fabrication and stamping

Commercial Details

• Make: FIMI
• Year: 1999
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material can it cut? It cuts ST37 from .118" to .315" thick and ST52 from .118" to .250" thick, in widths of 15" to 60".
• How fast does it run? Line speed ranges from 9 m/min on 750 mm cuts to 30 m/min on cuts of 3000 mm and longer.
• Who built it and when? It was built by FIMI in Italy in 1999.
• What should I ask when enquiring? Ask for photos or video of the shear running, and whether it can be inspected. Also confirm which control, electrics and accessories are included, the voltage, and the loading and shipping arrangements.