Used Fimi Tinplate Cut-to-Length Line with Rotary Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Fimi cut-to-length line with rotary shear and cassette leveler is available from Galaxie Corporation. It uncoils, levels and shears coil into flat sheets, and is set up for tinplate and stainless steel, both raw and annealed.

It takes coil 350–1,250 mm wide and 0.12–0.80 mm thick, runs at up to 100 m/min and cuts sheets 500–2,000 mm long. Maximum coil weight is 16 tons. The line includes a leveler with two cassettes, a pin hole detector and a three-station stacker.

Key Features

• Leveler supplied with two cassettes
• Pin hole detector for checking strip
• Electronic thickness gauge
• Pit with cascade conveyors ahead of the feed rolls
• Coil storage ramp for two coils and a coil car
• Three-station stacker and exit bundle conveyor

Technical Specifications

• Make: Fimi
• Materials: Tinplate and stainless steel (raw and annealed)
• Coil width: 350–1,250 mm (14"–48")
• Thickness: 0.12–0.80 mm (0.005"–0.031")
• Maximum speed: 100 m/min (330 ft/min)
• Coil inside diameter: 400 mm and 508 mm (16" and 20")
• Sheet length: 500–2,000 mm (20"–78")
• Maximum coil weight: 16 tons
• Cutting: Rotary shear
• Stacker: Three stations

Applications

• Tinplate sheets for cans and containers
• Tinplate sheets for metal packaging and closures
• Stainless steel sheet in thin gauges
• Sheet blanks for downstream stamping or printing

Commercial Details

• Make: Fimi
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What materials can the line process? It processes tinplate and stainless steel, both raw and annealed.
• What sheet lengths can it cut? The finished sheet length range is 500–2,000 mm.
• What equipment is included? It includes a coil storage ramp, coil car, uncoiler, pinch rolls, two-cassette leveler, pin hole detector, pit with cascade conveyors, feed rolls, thickness gauge, rotary shear, scrap bin, three-station stacker and exit bundle conveyor.
• What should I ask when enquiring? Ask for photos or video of the line under power, the control and electrics details, which cassettes and tooling are included, inspection arrangements, and loading and shipping.