Used Fully Automatic C/Sigma/Purlin Roll Forming Line | Galaxie Corporation, Wayne, Michigan, USA

This used fully automatic C, Sigma and purlin roll forming line with pre-punching and auto stacking is available from Galaxie Corporation. It was manufactured in 2025 and forms C and Sigma sections and purlins from hot rolled or galvanised coil.

The line handles material 2.5–5.0 mm thick with a yield strength of 390 MPa, at speeds of 0–35 m/min, and produces purlins 1.5–16.5 m long. It is supplied as a complete line, from the hydraulic uncoiler to the automatic stacker, with hydraulics, electrics and controls.

Key Features

• Hydraulic uncoiler with coil car
• Reception table and flattening station
• Pre-punch station with 10 sets, each for one single hole or one dual hole, with the double punches included
• Servo motor feeding
• Fully automatic size change by servo motors under PLC control
• Flying cut-off with post hydraulic mould cut, non-stop
• Inkjet printer and magnet-type auto stacker

Technical Specifications

• Machine type: Cees/Sigma/Purlin roll forming line with pre-punching and auto stacking
• Year: 2025
• Material: Hot rolled coil, galvanised coil
• Products: C, Sigma, purlin
• Material thickness: 2.5–5.0 mm
• Yield strength: 390 MPa
• Line speed: 0–35 m/min
• Purlin length: 1.5–16.5 m
• Roll forming stations: 28, including 6 for Sigma profiles
• Main motors: 2 × 45 kW three-phase asynchronous
• Pre-punch sets: 10 (single or dual hole)
• Cutting moulds: 11 pieces
• Size change: Fully automatic, servo motors with PLC control

Applications

• Steel purlins for roof and wall framing
• C and Sigma sections for building structures
• Structural framing for steel buildings and warehouses

Commercial Details

• Year: 2025
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness can it form? It forms material 2.5–5.0 mm thick, up to a yield strength of 390 MPa.
• What profiles does it make? It makes C, Sigma and purlin profiles, with 6 of the 28 forming stations used for Sigma sections.
• Does it punch and stack automatically? Yes, it has a pre-punch station with 10 sets and a magnet-type auto stacker.
• What should I ask when enquiring? Ask for photos or video of the line running, which profile sizes and tooling are included, the control and electrical details, the extra cutting moulds available, and loading and shipping arrangements.