Used Guida 6-HI Cut To Length Line with Flying Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Guida 6-HI cut-to-length line with flying shear is available from Galaxie Corporation. It uncoils stainless steel strip, levels it and cuts it into flat sheets, which are stacked on the line.

It handles coil up to 15 tons, material 0.4–3 mm thick and 500–1,500 mm wide, at a line speed of 30 m/min. A Siemens S7-300 PLC controls the line, and it is listed as a 1992 machine.

Key Features

• L-type coil car with 15-ton capacity
• Mandrel uncoiler with hydraulic expansion and powered hold-down roll
• 6-HI precision leveler with 11+12 roll configuration
• PVC applicator and paper coating on top and bottom surfaces to protect the sheet
• Undercut-design flying shear
• Scrap hydraulic shear with scrap box
• Stacker with side-arm and alignment drives, plus 6 m exit conveyor and scale
• Packing can continue without stopping the line on plates cut to 3 metres

Technical Specifications

• Make: Guida
• Year: 1992
• Material: Stainless steel
• Thickness: 0.4–3 mm
• Strip width: 500–1,500 mm
• Coil weight: 15 tons
• Line speed: 30 m/min
• Line direction: Left to right
• Sheet length: 500–6,000 mm
• Leveler: 6-HI precision, 11+12 rolls
• Leveler work roll diameter: 40 mm
• Leveler back-up roll diameter: 37 mm
• Leveler drive: 96 kW ABB reducer motor
• Uncoiler drive: 28 kW ABB reducer motor
• Flying shear drive: 44.4 kW ABB reducer motor
• Paper winder drive: 3.2 kW ABB reducer motor
• Telescopic belt conveyor: 2.4 m long, 7.6 kW ABB reducer motor
• Stacker entry belt conveyor: 3.4 m long, 9.4 kW ABB reducer motor
• Stacker and exit conveyors: 3 + 3 = 6 m each
• Package size: 1,500 x 6,000 mm
• Package weight: 2.5 tons
• Package height: 500 mm
• Control: Siemens S7-300 PLC

Applications

• Stainless steel sheet production from coil
• Flat blanks for fabrication and pressing
• Protected sheet with PVC and paper coating for surface-sensitive stainless
• Sheet stock for service centres and processors

Commercial Details

• Make: Guida
• Year: 1992
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material and sizes can the line process? It processes stainless steel 0.4–3 mm thick and 500–1,500 mm wide, cutting sheets 500–6,000 mm long.
• How fast does it run? The line speed is 30 m/min.
• Does it level and protect the sheet surface? Yes, it has a 6-HI precision leveler and PVC and paper coating stations on both the top and bottom surfaces.
• What should I ask when enquiring? Ask for photos or video of the line under power, whether an inspection can be arranged, which components and spare parts are included, the condition of the Siemens S7-300 controls and electrics, and the loading and shipping arrangements.