Used Guida Loop Robot Slitting Line, 1650 mm x 25 t | Galaxie Corporation, Wayne, Michigan, USA

This used Guida loop robot slitting line is available from Galaxie Corporation. It cuts wide steel coil into narrower strips and is listed as a 1650 mm (60") wide line with a 25 t maximum coil weight.

The line includes a robot tooling changing station, a four-arm tooling capstan, a paper interleaf system and a full hydraulic drum recoiler. Both the uncoiler and recoiler take 508 / 610 mm inner diameter coils up to 1,820 mm outside diameter.

Key Features

• 4-position coil storage rack and entry coil car
• Mandrel uncoiler with hydraulic expansion, sliding base and powered feed-up drive
• Peeler table, entry pinch rolls and edge guides
• Entry and exit crop shears
• Sliding head with 4-arm tooling capstan
• NLT robot tooling changing station (Norder Lagertechnik PRCS20)
• Paper interleaf system, rotary tension stand and overarm separator
• Full hydraulic drum recoiler with exit coil car

Technical Specifications

• Make: Guida
• Type: Loop slitting line with robot tooling changer
• Maximum coil width: 1650 mm (60"); also listed as 65 inches
• Maximum thickness: 5 mm (.196"); also listed as .098 inches
• Maximum coil weight: 25 t
• Uncoiler inner diameter: 508 / 610 mm
• Uncoiler maximum outer diameter: 1,820 mm
• Recoiler inner diameter: 508 / 610 mm (with packing plates)
• Recoiler maximum outer diameter: 1,820 mm
• Recoiler capacity: 25 t
• Stock number: 605634

Applications

• Slitting steel coil into narrower strips
• Coil processing for service centres
• Preparing strip for downstream stamping and forming
• Slitting of heavier-gauge coil up to 5 mm

Commercial Details

• Make: Guida
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size can this slitting line handle? It takes coils up to 25 t, 1,820 mm outside diameter, on 508 / 610 mm inner diameters.
• Does it have automatic tooling change? Yes, it has an NLT robot tooling changing station (Norder Lagertechnik PRCS20) and a sliding head with a 4-arm tooling capstan.
• Does it interleave paper? Yes, a paper interleaf system is fitted, along with an overarm separator and full hydraulic drum recoiler.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, which tooling and knives are included, control and electrical details, and loading and shipping options.