Used Harsle Four-Roll Plate Rolling Machine 40x2500mm | VIGERT, Nanjing, China

This used Harsle four-roll plate rolling machine, sold as 40x2500mm, is available from VIGERT. It is a hydraulic four-roller bending machine that pre-bends plate ends and rolls plate into cylinders, cones and other round shapes.

Its 40x2500mm designation indicates 40 mm and 2,500 mm. It can roll cones up to a 30-degree angle and works with NC and CNC control systems.

Key Features

• Pre-bends the plate end with the clamping point right at the plate edge, leaving very little straight edge
• Rear roll acts as a stop to square the plate parallel to the rolls, so it can be aligned in a single operation
• Plate is clamped between the upper and lower rolls during rolling, reducing the risk of slipping
• Side rolls tilt to set the cone angle, and the lower centre roll can also tilt, clamp and drive the plate
• Can bend the trailing edge as well as the leading edge of the plate
• Suited to NC and CNC control of the bending process

Technical Specifications

• Model: 40x2500mm
• Type: Hydraulic four-roll plate rolling machine
• Maximum cone angle: 30 degrees

Applications

• Rolling plate into cylinders and pipes
• Forming cones and tapered sections
• Pre-bending plate ends before rolling
• General plate fabrication

Commercial Details

• Make: Harsle
• Model: 40x2500mm
• Condition: Used
• Location: Nanjing, Jiangsu, China
• Seller: VIGERT

Frequently Asked Questions

• What can this machine roll? It rolls plate into cylinders, cones and other round shapes, and can pre-bend the plate ends.
• What is the maximum cone angle? It can roll cones up to a 30-degree angle.
• Can it be used with CNC control? Yes, four-roll machines of this kind suit NC and CNC control of the bending process.
• What should I ask when enquiring? Ask for photos or video of the machine under power, the control system and electrics, the rolls' condition, any tooling or accessories included, and loading and shipping arrangements.