Used Herr Voss 200048 DSJ Cut To Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Herr Voss 200048 DSJ cut-to-length line is available from Galaxie Corporation. It uncoils, levels and shears coil into flat sheets, and stacks them at the exit.

It takes coil up to 48 inches wide and 20,000 pounds, in thicknesses of 0.020–0.080 inch at 80K yield, and runs at up to 150 FPM. The line is complete with a Rowe coil car and mandrel uncoiler, a 4-HI Herr Voss precision leveler and a Herr Voss mechanical shear.

Key Features

• Rowe floor-type coil car
• Rowe mandrel uncoiler
• Paper interleaf winder
• Threading table with hydraulic lift
• 4-HI Herr Voss precision leveler
• Herr Voss mechanical shear
• Stacker with side tamper plates, scissor table and powered roller exit table

Technical Specifications

• Model: 200048 DSJ
• Thickness range: 0.020–0.080 in at 80K yield
• Coil width: 48 in
• Max coil weight: 20,000 lb
• Coil ID: 19–24.5 in
• Max coil OD: 60 in
• Line speed: 150 FPM
• Sheet length: 24–144 in
• Leveler: 4-HI Herr Voss precision leveler
• Shear: Herr Voss mechanical shear
• Controls: Controls, hydraulics and electrics included

Applications

• Cutting coil into flat sheets for fabrication shops
• Preparing levelled blanks for stamping and pressing
• Sheet supply for service centres and metal processors

Commercial Details

• Make: Herr Voss
• Model: 200048 DSJ
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil can this line handle? Coil up to 48 inches wide and 20,000 pounds, with a 19–24.5 inch ID and up to 60 inch OD.
• What sheet lengths and speed does it offer? Sheet lengths run from 24 to 144 inches at a line speed of 150 FPM.
• What equipment is included? It includes a coil car, mandrel uncoiler, paper interleaf winder, threading table, 4-HI leveler, mechanical shear, stacker, scissor table and powered exit table.
• What should I ask when enquiring? Ask for photos or video of the line under power, whether an inspection is possible, which components and tooling are included, the condition of the controls, hydraulics and electrics, and loading and shipping arrangements.