Used Herr Voss 60" x .250" Cut to Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Herr Voss cut to length line is available from Galaxie Corporation. It uncoils, flattens, levels and shears coil into flat sheets, which are then stacked.

It takes coil up to 60 inches wide and .250 inches thick, with a coil weight of 50,000 lbs. Sheet lengths run from 24 to 380 inches. The line is set up for carbon steel, galvanised and hot rolled material, and runs right to left.

The line is complete with electrics, hydraulics and controls, and is listed as installed and running.

Key Features

• L-type floor-standing coil car for 50,000 lb coils
• Mandrel uncoiler with 4-leaf hydraulic expansion, hydraulic sliding base and DC drag generator brake
• Powered hold-down roll, peeler table and entry pinch rolls
• Herr Voss flattener with 11 work rolls
• Herr Voss 4-high precision leveler with 23 work rolls and 7 flights of motorised back-up rolls
• Common 150 HP DC drive shared between flattener and leveler
• High-speed down-cut shear, run-out gauging conveyor, powered conveyor and drop-type stacker
• Digital drives, PLC and operator push-button station

Technical Specifications

• Manufacturer: Herr Voss (USA)
• Material: Carbon steel, galvanised, hot rolled
• Thickness range: .018"–.250"
• Maximum width: 60 inches
• Sheet length: 24–380 inches
• Maximum coil weight: 50,000 lbs
• Coil ID: 20 inches
• Maximum coil OD: 72 inches
• Line direction: Right to left
• Flattener: Herr Voss, 11 work rolls
• Leveler: Herr Voss 4-high precision, 23 work rolls, 7 flights of motorised back-up rolls
• Main drive: 150 HP DC, shared between flattener and leveler
• Shear: High-speed, down-cut
• Stacker: Drop type
• Control: PLC with digital drives

Applications

• Producing flat steel sheets from coil for fabrication shops
• Preparing flat blanks for stamping and pressing
• Cutting galvanised and hot rolled sheet to length for service centres
• Supplying levelled plate-weight sheet up to .250 inches thick

Commercial Details

• Make: Herr Voss
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material and thickness can this line process? It handles carbon steel, galvanised and hot rolled material from .018" to .250" thick, up to 60 inches wide.
• What sheet lengths can it cut? Sheet lengths range from 24 to 380 inches.
• What coil size can it take? It takes coils up to 50,000 lbs with a 20 inch ID and a maximum OD of 72 inches.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection opportunity, confirmation of which components and spare parts are included, details of the PLC, drives and electrics, and loading and shipping arrangements.