Used Herr Voss Loop Stainless Cut To Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Herr Voss loop cut-to-length line is available from Galaxie Corporation. It uncoils, levels and shears stainless steel and cold rolled steel coil into flat sheets.

The line takes coils up to 60 inches wide and 40,000 pounds, in thicknesses of 0.5–3 mm. It cuts sheets from 350 mm to 4,200 mm long at up to 40 m/min, and includes a Herr Voss 4HI precision leveler, a high speed downcut shear and a drop-type stacker.

Key Features

• 3-arm entry turnstile and L-type floor-standing coil car
• Mandrel uncoiler with 4-leaf hydraulic expansion, hydraulic sliding base and DC drag generator brake
• Powered hold down roll, peeler table and entry pinch rolls
• Herr Voss 4HI precision leveler with 5 flights of motorised back-up rolls and digital roll positioning
• PVC applicator for film coating the sheet
• High speed downcut shear with run out belt gauging table
• Drop-type stacker with pallet lifting jacks, shuttle car and side discharge table
• PLC control with digital drives and operator push button station

Technical Specifications

• Manufacturer: Herr Voss (USA)
• Material: Stainless steel, cold rolled steel
• Thickness range: 0.5–3 mm
• Maximum thickness: 0.118 inches
• Coil width: 60 inches (1,500 mm)
• Maximum coil weight: 40,000 pounds (20 ton)
• Coil inner diameter: 20 inches
• Maximum coil outer diameter: 72 inches
• Sheet length: 350–4,200 mm
• Maximum speed: 40 m/min
• Line direction: Left to right
• Drive: 150 HP DC drive
• Leveler: Herr Voss 4HI precision leveler
• Control: PLC with digital drives

Applications

• Flat stainless steel sheet for fabrication
• Cold rolled steel sheet blanks
• Sheet supplied to service centres and metal processors
• Film-coated sheet using the PVC applicator

Commercial Details

• Make: Herr Voss
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material and thickness can the line process? It processes stainless steel and cold rolled steel from 0.5 mm to 3 mm thick, up to 60 inches (1,500 mm) wide.
• What sheet lengths and speed does it offer? It cuts sheets from 350 mm to 4,200 mm long at up to 40 m/min.
• What coil size can it handle? It takes coils up to 40,000 pounds with a 20-inch inner diameter and a maximum outer diameter of 72 inches.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection arrangement, confirmation of which listed components are included, the control and electrical details, and loading and shipping arrangements.