Used Herr Voss Slitting Line with Injector Heads | Galaxie Corporation, Wayne, Michigan, USA

This used Herr Voss slitting line with injector heads and a strand extensioner is available from Galaxie Corporation. It cuts wide steel coil into narrower strips and rewinds them.

It handles coil 200–1,525 mm wide and 0.9–6.4 mm thick, with 10 inch diameter arbors and DC-powered drives. The line is listed as a 1984 build and includes two injector slitter heads, two scrap winders and a large amount of tooling.

Key Features

• Two injector slitter heads on 10 inch diameter arbors
• Herr traversing strand extensioner, model 72/2.687 9/5 4HI RH, with 5 flights and motorised adjustments
• Entry coil loading car and mandrel uncoiler with peeler
• Edge guide system, coil breaking unit, crop shear and side guide unit
• Recoiler with coil unloading car and a 4-arm turnstile with coil stripper
• Downender, conveyor system, and strapping and weigh station
• Upgrades listed: PLC upgrade (2012), half set of slitter knives (2012), new mandrel sleeve (2012), new spacer arm (2012), leveller rebuild (September 2011)

Technical Specifications

• Make: Herr Voss
• Year: 1984
• Coil width: 200–1,525 mm (60 inch)
• Material thickness: 0.9–6.4 mm (up to 0.25 inch)
• Arbor size: 10 inch diameter
• Slitter heads: 2 injector heads
• Drive: DC powered
• Scrap winders: 2
• Strand extensioner: Herr traversing, model 72/2.687 9/5 4HI RH, 5 flights

Applications

• Slitting steel coil into narrower strips for service centres
• Preparing strip for stamping and pressing
• Producing strip for roll forming and tube making
• Cutting coil to width for fabrication shops

Commercial Details

• Make: Herr Voss
• Year: 1984
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil width and thickness can it slit? It handles coil 200–1,525 mm wide and 0.9–6.4 mm thick.
• How many slitter heads does it have? It has two injector slitter heads on 10 inch diameter arbors.
• What equipment is included in the line? The line runs from an entry coil loading car and uncoiler through the slitter and strand extensioner to a recoiler, unloading car, turnstile, downender, conveyor, and strapping and weigh station.
• What should I ask when enquiring? Ask for photos or video of the line running, the tooling and knives included, the condition of the DC drives and PLC, and the arrangements for inspection, dismantling, loading and shipping.