Used Hyd-Mech H-22A Dual Column Horizontal Bandsaw | Galaxie Corporation, Wayne, Michigan, USA

This used Hyd-Mech H-22A dual column horizontal bandsaw is available from Galaxie Corporation. It cuts bar, tube and sections up to 22" x 22" in rectangular capacity, or 22" rounds.

It has a 10 H.P. blade drive with variable-frequency speed control from 40 to 300 FPM, carbide blade guides and a hydraulic vise. The shuttle feed strokes up to 34" in a single stroke and can index up to 9 times. It has no CNC control.

Key Features

• Dual column design
• Variable frequency drive for blade speed
• Carbide blade guides
• Hydraulic vise control
• Shuttle feed with multi-index up to 9x
• 3 H.P. hydraulic motor with 9-gallon hydraulic tank
• 30-gallon coolant tank

Technical Specifications

• Make and model: Hyd-Mech H-22A
• Type: Horizontal dual column bandsaw
• Rectangular capacity (H x W): 22" x 24" listed; general capacity 22" x 22"
• Round capacity: 22"
• Blade size: 22'6" x 2" x .063" (260" x 2" x .063")
• Blade speed: 40–300 FPM (variable frequency drive)
• Blade wheel diameter: 27"
• Blade drive: 10 H.P.
• Hydraulic motor: 3 H.P.
• Hydraulic tank capacity: 9 gallons
• Coolant tank: 30 gallons
• Shuttle stroke: Up to 34" single stroke (multi index up to 9x)
• Blade guides: Carbide
• Vise control: Hydraulic
• Table height: 31"
• Maximum work load: 15,000 lbs
• Voltage: 480 V, 3 phase
• Feed type: Semi
• CNC control: No
• Dimensions: 141" x 89" x 93" (also listed as 83" x 79" x 55")
• Weight: 12,500 lbs (also listed as 9,900 lbs)

Applications

• Cutting bar stock to length
• Sawing structural sections and tube
• Cutting round billets up to 22"
• Metal service centres and fabrication shops

Commercial Details

• Make: Hyd-Mech
• Model: H-22A
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What can this bandsaw cut? It handles rectangular stock up to 22" x 22" and rounds up to 22".
• How fast does the blade run? Blade speed is variable from 40 to 300 FPM through a variable frequency drive.
• What power supply does it need? It is listed as 480 volt, 3 phase.
• What should I ask when enquiring? Ask for photos or video of the saw running, the blade and guide condition, whether any tooling or accessories are included, electrical details, and loading and shipping arrangements.