Used Hyd-Mech V-25APC Vertical Tilt Frame Band Saw | Galaxie Corporation, Wayne, Michigan, USA

This used Hyd-Mech V-25APC fully automatic vertical tilt frame band saw with conveyor, built in 2014, is available from Galaxie Corporation. It cuts bar, bundles and sections to length, with the saw head tilting to cut at angles.

It cuts 30" x 25" at 90 degrees (20" x 25" with bundling clamps) and is driven by a 10 horsepower blade motor with an infinitely variable blade speed of 75–350 FPM. It comes with a 120" automatic shuttle feed, a Mitsubishi PLC control and 62' of powered roller conveyor.

Key Features

• Optional 120" automatic shuttle feed with automatic kerf compensation and rack and pinion servo drive
• 30" wide x 62' powered heavy-duty roller conveyor
• Optional hydraulic overhead bundling clamps
• Programmable go-to angle from 60 degrees left and right, with 6 degree canted head
• True direct blade drive with variable frequency drive
• Two full-stroking hydraulic vises with variable vise pressure
• Hydraulic chip conveyor, powered blade chip brush and chip buckets

Technical Specifications

• Model: V-25APC
• Year: 2014
• Capacity at 90 degrees: 30" x 25" (20" x 25" with bundling clamps)
• Capacity at 45 degrees: 21" x 25" (18.5" x 25" with bundling clamps)
• Capacity at 60 degrees right: 14.5" x 25" (8.5" x 25" with bundling clamps)
• Capacity at 60 degrees left: 13" x 25" (8.5" x 25" with bundling clamps)
• Blade size: 1-1/2" x 21' x .050"
• Blade motor: 10 HP
• Blade speed: 75–350 FPM (infinitely variable)
• Blade guides: Carbide
• Control: Mitsubishi PLC
• Coolant: Flood, 38 gallon tank
• Hydraulic tank capacity: 7 gallons
• Table height: 44"
• Voltage: 480 V, 3 phase
• Machine weight: 15,000 lbs
• Shuttle weight: 6,500 lbs

Applications

• Cutting bar and structural sections to length
• Sawing bundled material
• Mitre cutting at angles up to 60 degrees left and right
• Metal service centre and fabrication cutting

Commercial Details

• Make: Hyd-Mech
• Model: V-25APC
• Year: 2014
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What can it cut? At 90 degrees it cuts 30" x 25", or 20" x 25" with bundling clamps.
• How is material fed? It has a 120" automatic shuttle feed with kerf compensation, plus 62' of powered roller conveyor.
• What blade does it use? It takes a 1-1/2" x 21' x .050" blade, run at 75–350 FPM.
• What should I ask when enquiring? Ask for photos or video of it cutting under power, whether the shuttle feed, bundling clamps and conveyor are all included, the condition of the Mitsubishi control and electrics, and loading and shipping arrangements.