Used Ikoma 4 Arm Coil Turnstile 40,000 lb x 72 in | Galaxie Corporation, Wayne, Michigan, USA

This used Ikoma 4 arm turnstile is available from Galaxie Corporation. It holds coils on four arms and is rated at 40,000 lb (40,000#) by 72 in wide on each arm.

Rotation is powered by a hydraulic motor, and a hydraulic cylinder operates the locking pin. A hydraulic pushoff is fitted. The machine was built in 1988.

Key Features

• Four arms, each rated for 40,000 lb x 72 in
• Powered rotation by hydraulic motor
• Hydraulic cylinder actuated locking pin
• Hydraulic pushoff
• Not for use with a C-hook

Technical Specifications

• Make: Ikoma
• Year: 1988
• Number of arms: 4
• Capacity per arm: 40,000 lb x 72 in
• Coil weight: 40,000 lb
• Coil width: 72 in
• Usable arm length: 76 in
• Coil I.D. capacity: 16 in
• Passline: 54 in from floor to top of arm
• Rotation: Hydraulic motor
• Overall size: 257 in L x 88 in W x 71 in high
• Weight: 26,000 lb

Applications

• Storing steel coils ahead of a processing line
• Feeding coils to slitting, cut-to-length or blanking lines
• Holding several coils so coil changes are quicker

Commercial Details

• Make: Ikoma
• Year: 1988
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What is the capacity of this turnstile? Each of the four arms is rated for 40,000 lb by 72 in wide coils, with 76 in of usable arm length.
• How is it driven? Rotation is powered by a hydraulic motor, and the locking pin is actuated by a hydraulic cylinder.
• What are its dimensions and weight? Overall size is 257 in long x 88 in wide x 71 in high, and it weighs 26,000 lb.
• What should I ask when enquiring? Ask for photos or video of the turnstile running, whether the hydraulic power unit and controls are included, the condition of the arms and pushoff, and loading and shipping arrangements.