Used Mitre Engineering Loop Slitting Line | Galaxie Corporation, Wayne, Michigan, USA

This Used Mitre Engineering loop slitting line from 2003 is available from Galaxie Corporation. It slits wide steel coil into narrower strips and is supplied as a complete line from uncoiler to recoiler.

It takes coil 250–1,500 mm wide and 0.5–3 mm thick, with a coil capacity of 21 t and a line speed of 200 m/min. Slitting accuracy is 0.2 mm, and the line runs left to right.

Key Features

• Mandrel uncoiler with 4-leaf hydraulic expansion, sliding base, hold-down roll and powered drag brake
• Coil lift, peeler table, pinch rolls and feed-up table at the entry
• Slitter head with 190 mm diameter arbors and shimless tooling
• Swinger outboard for tooling changes
• Looping pit with cascade rolls and cross-over table, plus scrap choppers
• 20-inch recoiler with hydraulic drum, outboard bearing support, hydraulic push-off and overarm separator
• Exit L-type coil car and 4-arm turnstile
• Control Techniques Mentor II digital drives with self-contained floor-standing hydraulics

Technical Specifications

• Builder: Mitre Engineering
• Year: 2003
• Type: Loop slitting line
• Thickness range: 0.5–3 mm
• Coil width: 250–1,500 mm
• Coil capacity: 21 t
• Maximum coil weight: 46,000 lb
• Line speed: 200 m/min
• Slitting accuracy: 0.2 mm
• Cutting capacity: 21 cuts at 0.5 mm
• Arbor diameter: 190 mm
• Entry coil ID: 508 mm / 610 mm
• Exit coil ID: 508 mm
• Coil OD: 1,680 mm
• Line direction: Left to right
• Slitter drive: 50 kW DC
• Recoiler drive: 70 kW DC
• Drives: Control Techniques Digital Drives Mentor II

Applications

• Slitting steel coil into narrower strips for steel service centres
• Preparing strip for roll forming and tube making
• Supplying narrow-width coil for stamping and fabrication

Commercial Details

• Make: Mitre Engineering
• Year: 2003
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can this slitting line handle? It handles coil 250–1,500 mm wide and 0.5–3 mm thick, up to 21 t with a coil OD of 1,680 mm.
• How fast does it run? The line speed is 200 m/min, with slitting accuracy of 0.2 mm.
• Does it include a loop and recoiler? Yes, it has a looping pit with cascade rolls and a 20-inch recoiler with hydraulic drum and push-off.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, which tooling and spare arbors are included, the condition of the drives, controls and hydraulics, and loading and shipping options.