Used PM High Speed Blanking Cut-to-Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used PM high speed blanking / cut-to-length line is available from Galaxie Corporation. It uncoils, levels and cuts coil into flat sheets and blanks, then stacks them.

The line takes coil up to 72 inches wide and 0.120 inches thick, with a coil weight of up to 50,000 pounds. It runs at up to 275 FPM and cuts sheet lengths from 5.5 to 192 inches. Coil width range is 9–72 inches.

It is built around a PM 6-HI precision leveler with 17 work rolls and a double expandable mandrel uncoiler. The page states a complete electrical upgrade in 2006 and that the complete line was rebuilt in 1999. It has no digital drives or PLC controls.

Key Features

• Double expandable mandrel uncoiler
• Peeler table and entry crop shear
• 7-roll backed-up flattener driven by a 60 HP DC motor
• PM 6-HI precision leveler with 17 work rolls, driven by a 50 HP DC motor
• Servo feed rolls
• Down-cut bow-type shear
• 25 ft exit belt conveyor, stacker and end discharge table

Technical Specifications

• Brand: PM
• Stock number: 605501
• Maximum coil weight: 50,000 lb
• Maximum coil width: 72 in
• Coil width range: 9–72 in
• Maximum thickness: 0.120 in
• Coil inside diameter: 30 in
• Maximum coil outside diameter: 80 in
• Line speed: 275 FPM
• Sheet length range: 5.5–192 in
• Flattener: 7-roll backed-up, 60 HP DC motor
• Leveler: PM 6-HI precision, 17 work rolls, 50 HP DC motor
• Leveler work roll diameter: 1.5 in
• Exit conveyor: 25 ft belt
• Controls: No digital drives or PLC controls

Applications

• Producing flat sheets from coil for metal fabrication
• Blanking for stamping and pressing operations
• Supplying flat, levelled sheet to service centres and manufacturers

Commercial Details

• Make: PM
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can this line handle? It takes coil 9–72 inches wide, up to 0.120 inches thick and 50,000 pounds, with a 30 inch inside diameter and up to 80 inches outside diameter.
• How fast does it run and what sheet lengths does it cut? Line speed is 275 FPM and sheet lengths range from 5.5 to 192 inches.
• Does it have a PLC control system? No. It has DC drives and no digital drives or PLC controls, with a complete electrical upgrade carried out in 2006.
• What should I ask when enquiring? Ask for photos or video of the line running, inspection arrangements, what tooling and accessories are included, the condition of the electrics and DC drives, and loading and shipping details.