Used Pro Eco 72" Push Pull Pickling Line | Galaxie Corporation, Wayne, Michigan, USA

This used Pro Eco push pull pickling line is available from Galaxie Corporation. It is a complete line for pickling steel strip, taking coil up to 72 inches wide and 0.5 inch thick, with a maximum coil weight of 60,000 pounds.

The line runs at 350 FPM and has three pickling tanks with granite and rubber lined lids. Entry and exit Butech shears, a five roll entry flattener, a scale breaker, wash and rinse sections, a steam heated dryer and two oilers are included. Inspection, gauging and digital drive equipment are also part of the line.

Key Features

• Three pickling tanks with granite and rubber lined lids
• Butech shears at entry and exit
• Five roll flattener at entry, with a scale breaker
• Pre-wash and rinse sections with top and bottom spray heads, air knife and steam heated dryer
• Two oilers (spray and Peabody electrostatic) handling two types of oil
• Parsytec inspection system (2016) and ISRA Vision controller
• Water treatment system, acid holding tanks and a 12000 CFM three tray scrubber

Technical Specifications

• Brand: Pro Eco
• Type: Push pull pickling line
• Maximum strip width: 72 inches
• Maximum thickness: 0.5 inch
• Maximum coil weight: 60,000 pounds
• Line speed: 350 FPM
• Entry coil ID: 20–28 inches
• Exit coil ID: 24 inches
• Pickling tanks: 3, granite and rubber lined lids
• Recoiler: 250 HP DC with 2 speed gearbox
• Leveler: Bradbury, rebuilt in 2021
• Gauge: Gamma gauge, upgraded in 2012
• Steering rolls: Automatic controls (2023)
• Drives: ABB DCS 800 digital drives
• Scrubber: 12000 CFM, 3 tray unit
• Stock number: 605220

Applications

• Pickling hot rolled steel coil to remove scale before further processing
• Preparing strip for cold rolling, coating or slitting
• Surface cleaning and oiling of steel strip for steel service centres and mills

Commercial Details

• Make: Pro Eco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can the line handle? It takes coil up to 72 inches wide, 0.5 inch thick and 60,000 pounds, with an entry ID of 20–28 inches and an exit ID of 24 inches.
• How fast does it run? The line speed is 350 FPM.
• Can the line be inspected? It is described as a complete line that can be inspected installed.
• What should I ask when enquiring? Ask for photos or video of the line under power, how and when it can be inspected, and the full equipment list including the shears, leveler, inspection system and water treatment. Also confirm the condition of the tanks and drives, and arrangements for dismantling, loading and shipping.