Used Pro Eco Cut-To-Length Line, 60" x 3/16" | Galaxie Corporation, Wayne, Michigan, USA

This used Pro Eco cut-to-length line is available from Galaxie Corporation. It uncoils, levels and shears steel coil into flat sheets, and stacks them at the end of the line.

It takes coil up to 60 inches wide and .187 inches thick, with a coil weight capacity of 50,000 lb (25 ton). Line speed is variable from 50 to 300 FPM, and the leveler is a mechanical wedge-style frame with two interchangeable cassettes.

The line is listed as year 1985, with AC and drive controls updated in 2006 (Allen Bradley ControlLogix PLC and Siemens Simoreg drive controllers).

Key Features

• Four-arm entry storage turnstile and floor-level coil loading car
• Cantilevered mandrel uncoiler with peeler blade
• Entry crop shear and side trimmer
• Two leveler cassettes, each with 19 rolls in a 5-high arrangement with 7 backup flights
• Strip inspection and carry-over table plus looping pit quadrant tables, both with non-marking rolls
• Precision roll feeder and high-speed mechanical cut-off shear
• Blank inspection conveyor and reject belt conveyor with scrap cart, both with non-marking belts
• 14 foot air float stacker with squaring guides and end stop, plus lift and runout conveyors

Technical Specifications

• Make: Pro Eco
• Stock number: 604769
• Year: 1985
• Width range: 8–60 in
• Gauge range: .024–.187 in
• Coil weight capacity: 50,000 lb (25 ton)
• Coil outside diameter: 36–72 in
• Coil inside diameter: 19–24 in
• Sheet length: 24–168 in
• Sheet width: 8–62 in
• Pack height: 30 in including dunnage
• Pack weight: 20,000 lb
• Line direction: Right to left
• Line speed: 50–300 FPM, variable
• Leveler type: Mechanical wedge style with two cassettes
• Leveler motor: 200 HP
• Leveler cassette 1: 19 rolls, 2.50 in diameter, 5-high, 7 backup flights
• Leveler cassette 2: 19 rolls, 1.75 in diameter, 5-high, 7 backup flights
• Roll feeder motor: 55 HP
• Cut-off shear motor: 40 HP
• Stacker: 14 foot air float
• Controls: Allen Bradley ControlLogix PLC and Siemens Simoreg drive controllers (updated 2006)

Applications

• Producing flat steel sheets and blanks from coil
• Supplying blanks to stamping and fabrication shops
• Preparing flat stock for further processing by steel service centres

Commercial Details

• Make: Pro Eco
• Year: 1985
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can this line handle? It handles coil from 8 to 60 inches wide, .024 to .187 inches thick, up to 50,000 lb, with an outside diameter of 36–72 inches.
• What sheet lengths can it produce? It cuts sheets from 24 to 168 inches long and 8 to 62 inches wide.
• How fast does it run? Line speed is variable from 50 to 300 FPM.
• What should I ask when enquiring? Ask for photos or video of the line under power, the inspection arrangements, which leveler cassettes and accessories are included, the condition of the 2006 controls and electrics, and loading and shipping options.