Used Pro Eco Slitting Line, 74" x 0.500", 80,000 lb | Galaxie Corporation, Wayne, Michigan, USA

This used Pro Eco slitting line is available from Galaxie Corporation. It cuts wide coil into narrower strips and rewinds them, and this line handles coil up to 74 inches wide, 0.500 inch thick and 80,000 lb.

It has two Pro Eco ejector slitter heads on a common track base, each with 10.5 inch diameter arbors. Slitting speed is 0–150 FPM at full capacity, with a top line speed of 500 FPM. It is set up for stainless steel, aluminium and high strength steel.

Key Features

• Floor-type entry coil car with hydraulic lift and traverse, and powered positioning rolls
• Double-end uncoiler with high-tension air brakes on both sides and hydraulic sliding base with edge control
• 72 inch heavy-duty peeler system with power-driven hold-down roll
• 74 inch roll-face flattener with powered entry pinch rolls and adjustable rolls to set flatness
• Butech entry and exit crop shears
• Two slitter heads with powered top arbor adjustment and powered outboard retraction
• Recoiler with hydraulic pushoff, powered snubber, 200 HP motor with new drive and controls, and 74 inch hydraulic overarm separator
• Tooling included: knives, spacers and rubber strippers for 9.5 inch arbors, plus tooling for two separator shafts

Technical Specifications

• Brand: Pro Eco
• Stock number: 102219A
• Materials: Stainless steel, aluminium, high strength steel
• Maximum width: 72 inches (74 inch effective strip width on arbors)
• Thickness range: 0.017–0.500 inch
• Maximum coil weight: 80,000 lb at uncoiler and recoiler
• Maximum shear strength: 65,000 PSI
• Maximum yield strength: 80,000 PSI
• Entry coil ID: 20–24 inches
• Exit coil ID: 24 inches
• Entry coil OD: 36–72 inches
• Exit coil OD: 36–72 inches
• Slitter heads: 2 ejector heads
• Arbors: 2 x 10.5 inch diameter
• Line speed at full torque: 150 FPM
• Maximum line speed: 500 FPM
• Slitting capacity (60,000 PSI tensile): 5 cuts of 0.500 inch; 11 cuts of 0.135 inch; 21 cuts of 0.060 inch
• Recoiler motor: 200 HP
• Hydraulic units: 2 pump and tank units with automatic float control

Applications

• Slitting heavy-gauge plate coil into narrower strips
• Processing stainless steel, aluminium and high strength steel coil
• Preparing strip for service centres and downstream fabrication
• Producing thin to heavy gauge strip from 0.017 inch up to 0.500 inch

Commercial Details

• Make: Pro Eco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can it handle? It takes coil up to 72 inches wide, 0.500 inch thick and 80,000 lb, with 36–72 inch outside diameter.
• How many strips can it cut at once? In 60,000 PSI tensile material it can make 5 cuts of 0.500 inch, 11 cuts of 0.135 inch or 21 cuts of 0.060 inch.
• What speed does it run at? It runs at 150 FPM at full torque and up to 500 FPM maximum line speed.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, confirmation of the tooling and separator shafts included, the condition of the electrics and controls, and loading and shipping arrangements.