Used Quick Change Cassette Roof and Wall Roll Former | Galaxie Corporation, Wayne, Michigan, USA

This used quick change cassette roof and wall roll former is available from Galaxie Corporation. It forms roof and wall profiles on 24 stations, with a basic frame that takes different profiles through interchangeable cassettes.

It handles material up to 610 mm wide at speeds up to 60 m/min, and is supplied with a stand-alone hydraulic decoiler, a stretching module, a guiding table and a hydraulic cutting station. Length is measured to 0.5 mm accuracy up to 20 m.

Key Features

• Centre blocks in the frame and profile cassettes allow quick profile changes
• Stretching module with mid-stretch (parabolic wheel) and side-stretch rollers
• Fully adjustable guiding table: up-down, left-right and narrow to wide
• Hydraulic cutting station adjustable up-down and left-right, with easy access
• Control cabinet for length and number of pieces, with USB connection
• Lenze controller with feedback on the roll forming drive
• Decoiler with acoustic control, powered in both directions

Technical Specifications

• Type: Roll former, quick change cassette
• Max. material width: 610 mm
• Forming stations: 24
• Line speed: Up to 60 m/min
• Roll forming motor: 18.5 kW AC
• Cut-to-length accuracy: 0.5 mm, up to 20 m
• Decoiler mandrel drive: 11.0 kW AC, hydraulic mandrel, both directions
• Decoiler (inverter powered): 7.5 kW, Ø500–Ø600 mm
• Max. coil weight: 5.0 t
• Cutting hydraulic unit: 7.5 kW, separate
• Length without decoiler: 10.5 m
• Width: 2.10 m
• Decoiler distance from guiding table: Approx. 5.0 m
• Weight, frame with power train: Approx. 6.0 t
• Weight, cassette: Up to 1.5 t

Applications

• Roof sheet profiles
• Wall cladding profiles
• Building envelope panels
• Multi-profile production runs needing fast changeovers

Commercial Details

• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• How fast does it run? It runs at up to 60 m/min.
• How are profiles changed? Profiles are changed using centre blocks in the frame and profile cassettes.
• What is the maximum material width and coil weight? It takes material up to 610 mm wide and coils up to 5.0 t.
• What should I ask when enquiring? Ask for photos or video of the line running, which profile cassettes and tooling are included, the condition of the controls and Lenze drive, and the loading and shipping arrangements from Michigan.