Used Redman Slitting Line, 600 mm x 2.5 mm | Galaxie Corporation, Wayne, Michigan, USA

This used Redman slitting line is available from Galaxie Corporation. It cuts wide steel coil into narrower strips, handling strip widths of 25–600 mm and thicknesses of 0.5–2.5 mm.

It takes coils up to 5 t and 1,650 mm outside diameter, and runs at up to 125 m/min. The line is supplied complete with coil car, uncoiler, slitter head, scrap winders, looping pit and recoiler, plus tooling and knives.

Key Features

• Pit-type coil car for loading coils
• Uncoiler with outboard support arm and hold down roll
• Peeler table at the entry
• Slitter head with entry edge guides
• Two scrap winders
• Looping pit with cross over table
• Drag board tension stand
• Recoiler with overarm separator and two-arm exit turnstile
• Tooling and knives included

Technical Specifications

• Brand: Redman
• Strip width range: 25–600 mm
• Thickness range: 0.5–2.5 mm
• Max coil weight: 5 t
• Max line speed: 125 m/min
• Entry coil ID: 508 mm / 610 mm
• Max coil OD: 1,650 mm
• Stock number: 605651D

Applications

• Slitting steel coil into narrower strip for further processing
• Supplying strip to roll forming and tube-making operations
• Preparing coil widths for stamping and fabrication
• Service centre coil processing

Commercial Details

• Make: Redman
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What strip widths and thicknesses can it slit? It handles strip widths of 25–600 mm and material thickness of 0.5–2.5 mm.
• How fast does it run? The maximum line speed is 125 m/min.
• What coil sizes can it take? It accepts coils up to 5 t and 1,650 mm outside diameter, with an entry coil inside diameter of 508 mm or 610 mm.
• What should I ask when enquiring? Ask for photos or video of the line under power, whether an inspection is possible, which tooling and knives are included, the condition of the control and electrics, and loading and shipping arrangements.