Used Rowe Herr Voss Cut-To-Length Line with 6-Hi Leveler | Galaxie Corporation, Wayne, Michigan, USA

This used Rowe cut-to-length line with a Herr Voss 6-Hi leveler is available from Galaxie Corporation. It uncoils, levels and shears coil into flat sheets, handling coil up to 60 inches wide and 40,000 lb.

It processes stainless steel, cold rolled steel and aluminium from .030" to .125" thick at 40K yield, in coil widths of 24"–60". Sheet lengths run from 36" to 230". The line is a complete layout from turnstile and coil car through to drop stacker and exit conveyor.

Key Features

• Herr Voss 6-Hi leveler with Ø1.75" work rolls and digital back-up roll positioning
• Seven flights of top and bottom back-ups, with individual motorised adjustment on the bottom five
• Mandrel uncoiler with hold down roll, 3 arm turnstile and floor standing coil car
• 5 roll flattener with entry and exit pinch rolls
• Wysong high speed shear with air clutch and brake
• Paper winder and PVC applicator for surface protection
• Drop stacker, motorised end stop, motorised width adjustment, side squaring and motorised exit conveyor

Technical Specifications

• Coil weight: 40,000 lb
• Maximum coil width: 60 in
• Maximum thickness: .125 in
• Thickness range: .030"–.125" stainless, cold rolled and aluminium at 40K yield
• Coil width range: 24"–60"
• Coil ID: 20 in
• Maximum coil OD: 72 in
• Sheet length: 36"–230"
• Leveler: Herr Voss 6-Hi
• Leveler work rolls: Ø1.75 in
• Leveler motor: 75 HP
• Leveler speed: 0–160 FPM
• Shear: Wysong high speed shear with air clutch and brake
• Stock number: 605235

Applications

• Producing flat stainless steel sheets from coil
• Cutting cold rolled steel sheet to length
• Cutting aluminium sheet blanks to length
• Supplying levelled sheet to fabrication and stamping shops

Commercial Details

• Make: Rowe
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What materials and thicknesses can it run? It runs stainless steel, cold rolled steel and aluminium from .030" to .125" thick at 40K yield.
• What sheet lengths and coil widths does it handle? Sheets are cut from 36" to 230" long from coil 24"–60" wide.
• What leveler does the line have? A Herr Voss 6-Hi leveler with Ø1.75" work rolls, a 75 HP motor and speeds of 0–160 FPM.
• What should I ask when enquiring? Ask for photos or video of the line under power, whether it can be inspected installed, which equipment and spares are included, the control and electrical details, and how dismantling, loading and shipping will be handled.