Used Ruesch 146 Slitting Line with Slip Core Drum | Galaxie Corporation, Wayne, Michigan, USA

This used Ruesch 146 slitting line is available from Galaxie Corporation. It slits wide coil into narrower strips and is set up here for coil up to 26 inches wide, .105 inches thick and 20,000 pounds in weight.

The line is a complete layout with a ring slitter head on 4 1/8 inch arbors, a mandrel uncoiler, two scrap winders and a Ruesch recoiler with a slip core drum. A spare recoiler drum is included.

Key Features

• Coil tipper and traversing coil car or coil lift for loading
• Mandrel uncoiler with 4-leaf mandrel, sliding base and hydraulic expansion
• Ruesch ring slitter head with top and bottom back-ups
• Two scrap winders with oscillating wind
• Ruesch recoiler with slip core drum, hydraulic push-off and a spare drum
• Floor-standing overarm separator and 4-arm exit turnstile
• Precision slitter tooling and operator push-button controls

Technical Specifications

• Make: Ruesch
• Model: 146
• Maximum coil width: 26 in
• Maximum thickness: .105 in
• Thickness range: .010–.105 in
• Maximum coil weight: 20,000 lb
• Minimum cut width: .324 in
• Arbor diameter: 4 1/8 in
• Coil entry ID: 16 in
• Coil exit ID: 16 in
• Uncoiler mandrel face: 28 in
• Uncoiler feed-up drive: 25 HP DC
• Recoiler drum: 16 in diameter, 33 in face
• Recoiler drive: 40 HP DC
• Recoiler serial number: N3047E

Applications

• Slitting steel and other metal coil into narrower strip
• Producing slit coils for stamping and blanking
• Supplying strip to roll forming and tube making
• Service centre coil processing

Commercial Details

• Make: Ruesch
• Model: 146
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil can this slitting line handle? It takes coil up to 26 inches wide, .105 inches thick and 20,000 pounds, with a thickness range of .010–.105 inches.
• What is the narrowest strip it can cut? The minimum cut width is .324 inches.
• What recoiling equipment is included? It has a Ruesch recoiler with a 16 inch slip core drum, 33 inch drum face, 40 HP DC drive, hydraulic push-off and a spare drum.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection, which slitter tooling and spare drum are included, the condition of the DC drives and electrical controls, and loading and shipping arrangements.