Used Ruesch 24" x .090" Slitting Line, Stock 102112E | Galaxie Corporation, Wayne, Michigan, USA

This used Ruesch slitting line is available from Galaxie Corporation. It cuts wide metal coil into narrower strips and is rated for coil up to 24 inches wide, .090 inches thick and 5000 lb in weight.

The line is supplied with an uncoiler, a Ruesch ring type slitter head, a scrap winder and a recoiler. It is listed with an option for a second head.

Key Features

• Ruesch ring type slitter head
• Option for a second head
• Scrap winder for edge trim
• Hydraulic push off plate on the recoiler
• Exit two arm turnstile
• Edge guides and tension stand ahead of the slitter

Technical Specifications

• Make: Ruesch
• Maximum coil width: 24 inches
• Maximum coil thickness: .090 inches
• Maximum coil weight: 5000 lb
• Arbor size: 4 inches
• Entry coil ID: 16–20 inches
• Entry maximum coil OD: 50 inches
• Exit coil ID: 20 inches
• Exit maximum coil OD: 60 inches
• Stock number: 102112E

Applications

• Slitting steel and other metal coil into narrower strips
• Coil preparation for roll forming and stamping
• Producing narrow-width coils for metal fabrication

Commercial Details

• Make: Ruesch
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes can this slitting line handle? It takes coil up to 24 inches wide, .090 inches thick and 5000 lb, on a 4 inch arbor.
• What equipment is included? It comes with an uncoiler, pass line rolls, edge guides and tension stand, a Ruesch ring type slitter head, a scrap winder, a recoiler, a hydraulic push off plate and an exit two arm turnstile.
• Can a second head be added? The line is listed with an option for a second head.
• What should I ask when enquiring? Ask for photos or video of the line under power, an inspection, the slitter tooling included, the control and electrical details, and loading and shipping arrangements.