Used Ruesch 24" x .090" Slitting Line, Stock 102112F | Galaxie Corporation, Wayne, Michigan, USA

This used Ruesch slitting line is available from Galaxie Corporation. It cuts wide coil into narrower strips and is rated for material up to 24 inches wide and .090 inches thick, with coils up to 5000 lb.

The line runs at 0–500 FPM and includes a Ruesch ring-type slitter head. An additional head with the same specifications is available as an option.

Key Features

• Ruesch ring-type slitter head
• Option to add a second slitter head with the same specifications
• Scrap winder for slitting waste
• Exit two-arm turnstile
• Edge guides and tension stand

Technical Specifications

• Width: 24 in
• Thickness: .090 in
• Coil thickness range: .015–.093 in
• Max coil weight: 5,000 lb
• Arbor size: 4 in
• Entry coil ID: 16–20 in
• Entry max coil OD: 50 in
• Exit coil ID: 16 in
• Exit max coil OD: 60 in
• Line speed: 0–500 FPM
• Stock number: 102112F

Applications

• Slitting steel and other metal coil into narrower strips
• Preparing strip for stamping and roll forming
• Supplying coil service centres with custom-width coils

Commercial Details

• Make: Ruesch
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes does this slitting line handle? It takes coils up to 5,000 lb, with an entry coil outside diameter of up to 50 in and an inside diameter of 16–20 in.
• What thickness range can it slit? It is rated for .015–.093 in thick material, with a nominal capacity of .090 in at 24 in wide.
• Can a second slitter head be added? Yes, an additional Ruesch ring-type slitter head with the same specifications is offered as an option.
• What should I ask when enquiring? Ask for photos or video of the line under power, an inspection of the slitter head and tooling, the arbors and knives included, the control and electrics, whether the second head is included, and loading and shipping arrangements.