Used Ruesch 48" x .090" Slitting Line | Galaxie Corporation, Wayne, Michigan, USA

This used Ruesch slitting line is available from Galaxie Corporation. It cuts wide coil into narrower strips and is rated for material 48 inches wide, up to .090 inch thick, with coils up to 30,000 lb.

The line runs at up to 1200 fpm and is driven by a 75 Hp DC drive. It has an L-type entry coil car, a mandrel uncoiler and a recoiler with a two-speed gearbox and hydraulic push-off. It is offered with spare parts, manuals, drawings, hydraulics, electrics and controls.

Key Features

• L-type entry coil car
• Mandrel uncoiler for 16" to 20" coil ID
• North American edge control system
• Entry bridle roll, pinch rolls and edge guide rolls
• Shimless tooling with a spare set of top and bottom slitting arbors
• Pit crossover table with entry and exit cascade rolls
• Drag board tension stand, overarm separator and 4-arm exit turnstile

Technical Specifications

• Type: Slitting line
• Maximum coil width: 48 inches
• Thickness range: .005–.090 inch
• Maximum coil weight: 30,000 lb
• Maximum speed: 1200 fpm
• Uncoiler coil ID: 16–20 inches
• Arbor size: 5.5 inches
• Drive: 75 Hp DC
• Recoiler: 2-speed gearbox, hydraulic push-off
• Stock number: 101954D

Applications

• Slitting steel coil into narrower strips
• Preparing strip for stamping and forming
• Producing coils of set widths for further processing
• Processing thin to medium gauge coil in a service centre or manufacturing plant

Commercial Details

• Make: Ruesch
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size can it handle? It takes coil up to 48 inches wide and 30,000 lb, in thicknesses of .005–.090 inch.
• How fast does it run? The maximum speed is 1200 fpm.
• What is included with the line? It comes with spare parts, manuals, drawings, hydraulics, electrics and controls, plus a spare set of top and bottom slitting arbors.
• What should I ask when enquiring? Ask for the installed and running video, an inspection, the tooling and spares included, the condition of the DC drive and controls, and loading and shipping arrangements.