Used Schuler/Fagor Cut To Length Line With Oscillating Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Schuler/Fagor cut-to-length line with oscillating shear is available from Galaxie Corporation. It uncoils, levels, trims and cuts coil into flat sheets, which are then stacked at the exit.

It handles coil 380–2,000 mm wide and 0.5–2 mm thick, with a maximum coil weight of 60,000 lb (30 tons). Levelling is by a Schuler 5-high precision leveler with 21 work rolls of 45 mm diameter.

Key Features

• Schuler double expandable mandrel uncoiler
• Coil peeler and entry crop shear
• Schuler 5-high precision leveler with 21 work rolls
• Edge trimmer with scrap winders
• Servo feeder roll feeding the Fagor oscillating shear
• Schuler stacker system at the exit
• Supplied with electrics, hydraulics and controls

Technical Specifications

• Manufacturer: Schuler / Fagor
• Year: 1993
• Coil width range: 380–2,000 mm
• Thickness range: 0.5–2 mm
• Maximum coil weight: 60,000 lb (30 tons)
• Coil inner diameter: 36 in
• Maximum coil outer diameter: 78.74 in
• Leveler: Schuler 5-high precision, 21 work rolls
• Work roll diameter: 45 mm
• Shear: Fagor oscillating shear
• Line direction: Right to left

Applications

• Producing flat sheets from coil for general sheet metal fabrication
• Blank supply for stamping and pressing operations
• Thin-gauge sheet preparation for further processing

Commercial Details

• Make: Schuler
• Year: 1993
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil sizes does this line take? It takes coil 380–2,000 mm wide, 0.5–2 mm thick, up to 60,000 lb, with a 36 in inner diameter and up to 78.74 in outer diameter.
• What equipment is included in the line? It includes a coil storage saddle, coil car, double mandrel uncoiler, hold down roll, coil peeler, entry crop shear, 5-high leveler, edge trimmer with scrap winders, servo feeder, oscillating shear, run out table and stacker.
• Which direction does the line run? The line runs right to left.
• What should I ask when enquiring? Ask for photos or video of the line running, whether it can be inspected, the condition of the leveler rolls and shear blades, the electrics and controls, and loading and shipping arrangements.