Used Siemi Heavy Gauge Cut-To-Length Line | Galaxie Corporation, Wayne, Michigan, USA

This used Siemi heavy gauge cut-to-length line is available from Galaxie Corporation. It uncoils, flattens and shears heavy coil into stacked flat sheets up to 12 metres long.

The line takes coil up to 98 inches (2,500 mm) wide and 0.60 inches (15 mm) thick, with a 40-ton double cone uncoiler. It is a complete line, from coil ramp and loading cradle through to the drop stacker and stacker table.

Key Features

• Coil ramp and loading cradle for feeding coils
• Double cone uncoiler with free-standing hold-down roll
• Hydraulically driven peeler section
• Entry edge guides and entry pinch roll
• Photocell coil centring system
• 5-roll straightener and 4-high leveler with 15 work rolls
• Entry crop shear, edge trimmer and scrap chopper with helicoidal blades

Technical Specifications

• Manufacturer: Siemi, Italy
• Maximum coil width: 98 in (2,500 mm)
• Maximum thickness: 0.60 in (15 mm)
• Coil weight: 80,000 lb
• Uncoiler capacity: 40 t, double cone
• Entry pinch roll length: 2,700 mm
• Straightener: 5 rolls, 300 mm diameter
• Leveler: 4-high, 15 work rolls
• Leveler work roll diameter: 90 mm
• Shear: Flying shear
• Maximum sheet length: 12 m
• Stacking: Run-out conveyor, drop stacker and stacker table

Applications

• Heavy plate and sheet blanks cut from coil
• Flat stock for structural and fabrication work
• Material for heavy equipment and machinery manufacture
• Feedstock for service centres and press shops

Commercial Details

• Make: Siemi
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size can this line handle? It handles coil up to 98 inches (2,500 mm) wide and 0.60 inches (15 mm) thick, with a 40-ton uncoiler and 80,000 lb coil weight.
• How long are the sheets it can cut? It cuts sheets up to 12 metres long using the flying shear.
• What equipment is included in the line? It includes the coil ramp, loading cradle, uncoiler, peeler, straightener, crop shear, edge trimmer, scrap chopper, leveler, flying shear, run-out conveyor and stackers.
• What should I ask when enquiring? Ask for video of the line running, which is available on request, and confirm the control system and electrics, the tooling and spares included, inspection arrangements, and loading and shipping of a line this size.