Used Spotti Fimi Cut-To-Length Line, 2000 mm x 9 mm | Galaxie Corporation, Wayne, Michigan, USA

This used Spotti (Fimi / Spotti) cut-to-length line is available from Galaxie Corporation. It uncoils steel coil, levels it and shears it to length as flat sheet or plate.

It handles coil from 2.5 mm to 9.0 mm thick, with a coil capacity of 30,000 kg and a maximum coil outside diameter of 2,000 mm. The line is a complete layout, from the coil storage ramp and coil car through to the exit conveyor, and has two levellers plus a mechanical flying shear.

Key Features

• Coil storage ramp and coil car for loading
• Double cone uncoiler with DC drag generator brakes, sliding base and hold-down roll
• Peeler table and pinch rolls at the entry
• 5-roll coil breaker followed by an 11-roll backed-up leveller
• 19-roll light gauge leveller with motorised adjustment of the back-ups
• Mechanical flying shear on linear bearings
• Exit gauging table, motorised stacker lift tables, exit conveyor and motorised end stop
• Emerson digital drives and Allen Bradley PLC control

Technical Specifications

• Make: Spotti (Fimi / Spotti)
• Thickness range: 2.5–9.0 mm
• Maximum coil width: 2,000 mm (78.7 in)
• Coil capacity: 30,000 kg (60,000 lb)
• Coil outside diameter: Up to 2,000 mm
• Coil inside diameter: 600–810 mm
• Coil breaker: 5 rolls, 250 mm diameter
• Heavy leveller: 11 rolls, 110 mm diameter, 5 flights of top and bottom back-ups
• Heavy leveller motor: 168 kW DC
• Light gauge leveller: 19 rolls, 48 mm diameter work rolls
• Light gauge leveller drive: 132 kW DC
• Shear: Mechanical flying shear
• Controls: Digital controls, Emerson digital drives, Allen Bradley PLC

Applications

• Flat steel sheet and plate blanks for fabrication
• Blanks for structural and heavy fabrication
• Feedstock for laser, plasma and press cutting
• Steel service centre sheet production

Commercial Details

• Make: Spotti
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and coil size can it run? It runs material from 2.5 mm to 9.0 mm thick, with coils up to 30,000 kg and 2,000 mm outside diameter.
• How is the material levelled? It has an 11-roll backed-up leveller and a separate 19-roll light gauge leveller, plus a 5-roll coil breaker.
• What control system does it use? It uses digital controls with Emerson digital drives and an Allen Bradley PLC.
• What should I ask when enquiring? Ask for photos or video of the line running, an inspection arrangement, confirmation of which equipment is included, the condition of the electrics and drives, and loading and shipping details.