Used Stamco 4 Arm Coil Turnstile, 40,000 lb x 66 in | Galaxie Corporation, Wayne, Michigan, USA

This used Stamco 4-arm turnstile is available from Galaxie Corporation. It holds and indexes coils ahead of a processing line, and is rated for coils up to 40,000 pounds and 66 inches wide.

It has power rotation, driven by a hydraulic motor and pump, and C-hook arms with 45 inches of usable length that accept coils with a 16 inch inside diameter.

Key Features

• Four arms with power rotation
• C-hook type arms
• Hydraulic drive with a detent cylinder for the turnstile

Technical Specifications

• Make: Stamco
• Type: 4-arm turnstile with power rotation
• Coil weight capacity: 40,000 lb
• Coil width: 66 in
• Number of arms: 4
• Usable arm length: 45 in
• Coil inside diameter accepted: 16 in
• Hydraulic motor: 1 hp, 8 cu in/rev at 113 rpm, 4 gpm
• Pump: 8 gpm at 1,000 psi
• Detent cylinder: 3.25 in bore, 2.5 in stroke
• Passline height: 46.5 in from floor to top of arm
• Overall length: 197.5 in
• Base size: 60 in diameter

Applications

• Coil storage ahead of slitting, cut-to-length and blanking lines
• Feeding coils to stamping press lines
• Holding and indexing coils at roll forming line entries

Commercial Details

• Make: Stamco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size does this turnstile take? It is rated for coils up to 40,000 lb and 66 in wide, with a 16 in inside diameter.
• How is it rotated? It has power rotation from a hydraulic motor and pump, with a detent cylinder on the turnstile.
• How many arms does it have? It has four C-hook type arms, each with 45 in of usable length.
• What should I ask when enquiring? Ask for photos or video of it rotating under power, the condition of the hydraulics and arms, whether the pump and motor are included, the electrical or control details, and loading and shipping arrangements.