Used Stamco 4 Arm Entry Turnstile, 72" x 60,000 lb | Galaxie Corporation, Wayne, Michigan, USA

This used Stamco 4 Arm Entry Turnstile is available from Galaxie Corporation. It holds coils on four arms at the entry of a processing line and rotates under power to present the next coil.

Each arm carries up to 60,000 lb, and the turnstile accepts coils up to 72" wide with a minimum inside diameter of 20". Usable arm length is 65".

Key Features

• Powered rotation
• Four arms for storing several coils at the line entry
• C-hook slot in each arm, 8" wide x 13" high

Technical Specifications

• Brand: Stamco
• Type: 4-arm entry turnstile
• Maximum coil weight: 60,000 lb per arm
• Maximum coil width: 72"
• Minimum coil I.D.: 20"
• Number of arms: 4
• Usable arm length: 65"
• Arm width: 14.50"
• Overall arm length: 206" tip to tip
• Floor to top of arm: 60"
• C-hook slot: 8" wide x 13" high
• Rotation: Powered
• Base size: 60" diameter
• Overall size: 206" L x 60" W x 110" H
• Weight: 18,000 lb

Applications

• Storing coils at the entry of slitting lines
• Feeding coils to cut-to-length lines
• Coil handling ahead of stamping and press feed lines
• Coil storage in steel service centres

Commercial Details

• Make: Stamco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size can it hold? It takes coils up to 72" wide, weighing up to 60,000 lb per arm, with a minimum inside diameter of 20".
• How many arms does it have? It has four arms, each with 65" of usable length.
• Is the rotation powered? Yes, the turnstile has powered rotation.
• What should I ask when enquiring? Ask for photos or video of the turnstile rotating under power, details of the drive and electrical controls, what is included, and loading and shipping arrangements for its 18,000 lb weight.