Used Stamco Aluminium & Stainless Slitting Line, 60" | Galaxie Corporation, Wayne, Michigan, USA

This used Stamco slitting line with two slitter heads and a Herr Voss strand extensioner is available from Galaxie Corporation. It slits coil into narrower strips and is set up for stainless steel, aluminium and painted carbon steel.

It takes coil 24–56 inches wide and up to 50,000 lb, in thicknesses of .024–.135 inches for stainless and .024–.187 inches for aluminium. Line speed is 300 FPM, and the line runs left to right.

Key Features

• 4-arm entry turnstile and L-type coil cars at entry and exit
• Mandrel uncoiler with outboard bearing support and peeler table
• Two Stamco slitter heads, one 56 inch and one 60 inch, on 9 inch diameter arbors
• Looping pit with cascade rolls and drag board tension
• Scrap winders
• Herr Voss strand extensioner, model VKSE 72-1.750-19-7-6HI, dated 2006/2007
• Shear deflector roll unit with pinch rolls
• Recoiler with 20 inch hydraulic drum and 2-speed gearbox

Technical Specifications

• Make: Stamco
• Materials: Stainless, aluminium, painted carbon steel
• Thickness, stainless: .024–.135 inches
• Thickness, aluminium: .024–.187 inches
• Coil width: 24–56 inches
• Maximum line width: 60 inches
• Coil weight: 50,000 lb
• Coil OD: 72 inches
• Coil ID: 20 inches, entry and exit
• Line speed: 300 FPM
• Minimum slit width: 2 inches
• Minimum side trim: 1/4 inch
• Line direction: Left to right
• Slitter heads: 2 (56 inch and 60 inch)
• Arbor size: 9 inch diameter
• Uncoiler drive: 100 HP DC
• Recoiler drive: 100 HP DC
• Recoiler gearbox ratios: 34.22:1 and 68.30:1
• Stock number: 102093A

Applications

• Slitting stainless steel coil to narrower strip
• Slitting aluminium coil to width
• Processing painted carbon steel coil
• Coil service centre and strip supply work

Commercial Details

• Make: Stamco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What materials can this line slit? It is set up for stainless steel, aluminium and painted carbon steel.
• What coil sizes does it handle? Coil width is 24–56 inches, coil weight up to 50,000 lb, with a 72 inch maximum outside diameter and a 20 inch inside diameter.
• How fast does it run? Line speed is 300 FPM.
• What should I ask when enquiring? Ask for photos or video of the line running, whether an inspection is possible, which tooling and arbors are included, the condition of the DC drives and electrics, and the loading and shipping arrangements.