Used Stamco Combi Line With CNC Slitter Head | Galaxie Corporation, Wayne, Michigan, USA

This Used Stamco combi line with CNC slitter head and cassette leveler is available from Galaxie Corporation. It is a slitting and cut-to-length (slear) line that processes coil into strip or flat stacked sheets.

It handles material from .015" to .135" thick and 8" to 60" wide, with coils up to 40,000 lb. Stacks are 12"–144" long and up to 20,000 lb. The line has a Stamco CNC slitter head plus a traditional Stamco slitter head, and a 4HI cassette leveler with a spare cassette.

Key Features

• Stamco CNC slitter head alongside a traditional Stamco slitter head
• Stamco cassette leveler with 4HI cassette (17 rolls, 2" diameter) and a spare cassette with 1.5" rolls
• Entry coil car, uncoiler with hold down roll and hydraulic peeler table
• Three roll flattener and entry and exit crop shears
• Looping pit with pit carry over table
• Recoiler with overarm separator and exit coil car
• Feeder, mechanical shear, conveyor and stacker
• Exit conveyor with scale
• Control Techniques digital drives and Allen Bradley PLC

Technical Specifications

• Make: Stamco
• Thickness range: .015"–.135"
• Width range: 8"–60"
• Max coil weight: 40,000 lb
• Coil ID range: 20"–24"
• Max coil OD: 72"
• Stack length range: 12"–144"
• Max stack weight: 20,000 lb
• Leveler cassette: 4HI, 17 rolls, 2" diameter rolls
• Spare cassette rolls: 1.5" diameter
• Drives: Control Techniques digital drives
• PLC: Allen Bradley
• Included: Knives, rubbers, tooling, hydraulics, electrics and spare parts

Applications

• Slitting coil into narrower strips
• Producing flat, levelled stacked sheets from coil
• Preparing steel strip and blanks for stamping and fabrication
• Coil processing in service centres and manufacturing plants

Commercial Details

• Make: Stamco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What material sizes can this line process? It processes coil from .015" to .135" thick and 8" to 60" wide, up to 40,000 lb.
• What sheet lengths can it stack? Stack lengths run from 12" to 144", with stacks up to 20,000 lb.
• What levelling and slitting equipment does it have? It has a Stamco cassette leveler with 17 rolls of 2" diameter plus a spare 1.5" cassette, and both a Stamco CNC slitter head and a traditional Stamco slitter head.
• What should I ask when enquiring? Ask for photos or video of the line under power, inspection arrangements, confirmation of the tooling, knives and spare parts included, the condition of the control and electrics, and loading and shipping arrangements.