Used Stamco High Speed Mechanical Shear | Galaxie Corporation, Wayne, Michigan, USA

This used Stamco high speed mechanical shear is available from Galaxie Corporation. It was built for use in a cut-to-length line, where it cuts moving strip or sheet to length.

It cuts material 0.055–0.250 in thick (65,000 PSI) up to 72 in wide and is rated at 150 strokes per minute. It was previously run in a cut-to-length line at 150 FPM. It is sold without blades and without its drive motor.

Key Features

• Air clutch and brake
• Clutch and brake replaced in 2016
• Designed to work inside a cut-to-length line

Technical Specifications

• Type: Mechanical high speed shear
• Stock number: 605025
• Cutting capacity: 0.055–0.250 in thick x 72 in wide (65,000 PSI)
• Strokes per minute: 150
• Previous line speed: 150 FPM in cut-to-length line
• Clutch and brake: Air
• Motor: 30 HP AC, 1085 RPM, frame 365T, type P (motor missing)
• Blades: Not included
• Overall dimensions: 9 ft long x 4 ft wide x 11 ft high
• Weight: 31,900 lbs

Applications

• Cutting coil to length in cut-to-length lines
• Producing flat blanks from steel strip
• Sheet and plate preparation for press and fabrication shops

Commercial Details

• Make: Stamco
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What thickness and width can it cut? It cuts 0.055–0.250 in thick material up to 72 in wide, at 65,000 PSI.
• Is the motor included? No, the 30 HP AC motor is missing, and the shear is sold without blades.
• Where was it used? It ran in a cut-to-length line at 150 FPM and was removed from service in 2017.
• What should I ask when enquiring? Ask for photos of the machine, the condition of the frame, flywheel and air clutch, what motor and blades will be needed, and loading and shipping arrangements for a machine of about 31,900 lbs held in storage.