Used Stamco Loop Slitting Line, 60" x 40,000 lb | Galaxie Corporation, Wayne, Michigan, USA

This used Stamco loop slitting line, built in 1984, is available from Galaxie Corporation. It cuts wide coil into narrower strips and rewinds them, and this line is set up with three slitter heads and a looping pit.

It handles coil up to 60 inches wide and 40,000 lb in weight, on a 7-inch arbor. It is a complete line, from the entry coil car through to the exit coil car, with hydraulics, electrics and controls.

Key Features

• L-type entry coil car and mandrel uncoiler
• Hydraulic peeler table, entry pinch roll and 3-roll coil breaker
• Entry crop shear, crop shear and exit crop shear
• Pit entry unit, passline hold-down unit, looping pit and pit exit unit
• Drag board tension stand with pads
• Scrap baller
• Recoiler and exit coil car

Technical Specifications

• Make: Stamco
• Year: 1984
• Stock number: 605278
• Maximum coil width: 60 inches
• Maximum coil weight: 40,000 lb
• Arbor size: 7 inches
• Slitter heads: 3

Applications

• Slitting wide steel coil into narrower strips
• Preparing coil for roll forming and stamping
• Supplying strip to service centres and metal processors

Commercial Details

• Make: Stamco
• Year: 1984
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What coil size can this line handle? It takes coil up to 60 inches wide and 40,000 lb on a 7-inch arbor.
• How many slitter heads does it have? It has three slitter heads.
• Is it a complete line? Yes, it runs from the entry coil car to the exit coil car, including looping pit, recoiler, scrap baller, hydraulics, electrics and controls.
• What should I ask when enquiring? Ask for photos or video of the line under power, whether an inspection is possible, which tooling and knives are included, the condition of the controls and electrics, and loading and shipping arrangements.