Used Timesavers 1350WRB Wet Roll Brush Deburring Machine | Galaxie Corporation, Wayne, Michigan, USA

This used Timesavers Model 42 Series 1350WRB wet roll brush deburring machine is available from Galaxie Corporation. It is a Netherlands-built machine dated 2023, which removes burrs from flat metal parts using brush and abrasive heads.

It takes parts up to 1,350 mm wide and 0.8–100 mm thick, with a feed speed of 0.2–8 m/min. A vacuum pump holds small parts on the conveyor, and the machine comes with a set of abrasive belts, brushes and spare parts.

Key Features

• Frequency controller on the carousel roll brush head (5–9 rpm)
• Vacuum pump to hold parts on the conveyor
• Magnetic track for small parts
• Extended rear table
• Prep outfeed table with conveyor cleaning brush
• 90 degree outfeed table
• Motorised table height adjustment

Technical Specifications

• Manufacturer: Timesavers (Netherlands)
• Model: Model 42 Series 1350WRB
• Year: 2023
• Max working width: 1,350 mm
• Opening: 0.8–100 mm
• Feed speed: 0.2–8 m/min
• Vacuum pump: 15 kW
• Conveyor motor: 2.6 kW
• Table height adjustment motor: 0.37 kW
• Total power: 37 kW
• Electrical: 460 V, 60 Hz
• Control voltage: 24 V
• Required air pressure: 6 bar
• Total air consumption: 25 l/min
• Dust extraction required: 5,500 m³/h
• Dimensions: 200.79" W x 88.58" D x 102.36" H
• Weight: 13,699 lb

Applications

• Deburring laser-cut and punched sheet metal parts
• Edge rounding of fabricated flat parts
• Surface finishing of metal components
• Cleaning small parts held on a magnetic or vacuum conveyor

Commercial Details

• Make: Timesavers
• Model: Model 42 Series 1350WRB
• Year: 2023
• Condition: Used
• Location: Wayne, Michigan, USA
• Seller: Galaxie Corporation

Frequently Asked Questions

• What is the maximum part width and thickness? The working width is up to 1,350 mm and the opening is 0.8–100 mm.
• What services does it need? It needs 460 V, 60 Hz power, 6 bar air and dust extraction of 5,500 m³/h.
• What comes with the machine? It includes a set of abrasive belts, steel wire and aluminium oxide brushes, a conveyor cleaning brush, a magnetic track, extra tables and spare parts.
• What should I ask when enquiring? Ask for photos or video of the machine under power, the condition of the brushes and belts, a full list of included accessories and spares, details of the electrics and dust extraction needs, and loading and shipping arrangements.